Would you believe Crash Bandicoot has left his 20s? The series celebrates its 30th birthday this week, and every mainline release is still available to play on modern consoles. While the Bandicoot starts noticing the physical effects of those tornado spins and body slams, then, we can relive the glory days with all four central releases.

Not only that, but you bet there's a whole host of gadgets and gizmos designed to accompany you on this platforming odyssey. From socks to official artbooks, that ginger face pops up a lot more than you might assume. Whether you jumped in with It's About Time or you've seen the final levels of Crash Bash, there's plenty to jump into here.

Naughty Dog's Crash Bandicoot launched in North America and Europe in 1996, hitting the original PlayStation with a flourish. Crash went on to become the brand's mascot character for the rest of the 90s and well into the 2000s. In all that time, there have only been four numbered entries in the franchise, but that's not counting some series highlights; Wrath of Cortex, Warped, and Crash Team Racing.

Crash Bandicoot games

Crash Bandicoot accessories

We're also rounding up the best Legend of Zelda merch as well as the best Mario merch and Resident Evil merch for more memories.

I hope you've been practicing your airs and graces, because a Lego Downton Abbey set is on its way.

This thing feels as grand as the actual house itself with all that stately grandeur; Lego Downton Abbey challenges some of the best Lego sets with a whopping 4,711 pieces, and you flip the facade around to reveal some of the location's best-known spaces like the dining room, servant's hall, and library. There are over 10 minifigures included as well, ranging from The Dowager Countess and Lord Grantham to Mrs. Hughes.

Lego Downton Abbey will be available to order from October 4, or October 1 if you're part of the free Lego Insiders program.

This ode to the beloved period drama is actually based on a fan design submitted by Sebastian Veselka, whose build gained thousands of supporters and was eventually chosen by Lego to be turned into an actual kit.

"Rebuilding Downton Abbey as a LEGO set felt like the perfect way to celebrate the series in a personal way, bringing together my love of British architecture, my memories of watching the show with my family, and the atmosphere of the 1920s," says Veselka. "Seeing the project reach 10,000 supporters in just three months was incredible. I’m so grateful to everyone who supported it and can’t wait for fans to travel back in time and step inside the Crawley family’s iconic home in LEGO brick form."

In a sweet twist, there's actually a cute Easter egg referencing Veselka in this model; the newspaper features their initials, 'SV.'

Of course, that's not the only reference hidden away there. Fans of the series will spot plenty of goodies inspired by the show like Mr. Carson's candlestick telephone and plaques below bells for each room (including a cheeky new addition, the "Lego room").

Because so much drama takes place around the dining table, the minifigures for Lego Downton Abbey feature additional clothing elements that are especially designed to let them sit.

Lego Downtown Abbey can be added to your own household this October, alongside a new Lego PlayStation and Lego Wallace & Gromit.

This isn't the only cool new kit to be revealed over the last few days; as it happens, we're also getting a new Lego Link & Epona kit based on Ocarina of Time.

• See the latest Lego kits at Lego

Following a surprise announcement yesterday during a Legend of Zelda-themed Nintendo Direct, Hasbro's Master Sword prop is now up for pre-order. Usually, replicas like this are many rupees… but not in this case. The toy is much more affordable than I thought it'd be.

Announced alongside merch for the Ocarina of Time Remake, including a playable ocarina, the Hasbro Master Sword just went live with pre-orders at Amazon, Hasbro Pulse, and Walmart. It'll set you back $39.99, and will arrive on your doorstep in Spring 2027 (just in time for the new movie, in other words).

While this is a smaller prop and isn't a 1:1 replica (it's very much a toy), it still looks rather handsome in product photography with plenty of detail to its name. Yes, it's clearly made of plastic, but the colors and proportions are surprisingly spot-on despite this thing being 27 inches rather than the full 40 or so.

This may be smaller than the actual Master Sword at 27 inches, but it's still packed with cool features. It uses 15+ sound effects, including the equip/un-equip audio when the toy is lifted or set down by the hilt. It also provides swiping and clashing noises when swung, or upon impact. Rather than the Ocarina remake everyone's going nuts over though, this Master Sword is based on the one seen in Tears of the Kingdom. That means it'll go nicely with Hasbro's first Legend of Zelda action figures.

The Electronic Master Sword is being made by the folks over at Hasbro Pulse, e.g. the place behind incredible replicas like the Darth Vader Force FX Elite Lightsaber or that phenomenally tempting Wolverine helmet. However, I don't think it'll be the only Master Sword produced there. I'd be downright astounded if those folks didn't make a full-size, 1:1 scale replica at some point, not unlike the Proplica version that made us weep with pure Zelda fandom joy. An absurdly detailed replica designed for adult collectors with sound effects and a cool stand to show it off on? That's absolutely within Pulse's wheelhouse. We just have to be patient, I guess.

In the meantime, will you be grabbing this new Master Sword?

This isn't the only awesome merch revealed during the Zelda direct; we also got a Lego Link and Epona kit, not to mention two new Ocarina of Time amiibo figures. They're certainly contenders for our list of the best Legend of Zelda merch...

• See all Legend of Zelda amiibo at Amazon

The brand-new Legend of Zelda Ocarina of Time amiibo may feel pretty cursed to some, at least where their unlocks are concerned, but I'm absolutely smitten with these new collectibles.

The $24.99-each (GameStop) amiibo aren't just adorable little replicas of Young Link and Young Zelda as they appear in the upcoming Ocarina of Time Remake, but they also pay homage to some of my most beloved game artwork, at least for Link. The image of the little Hero of Time glancing at Navi the fairy as she's about to perch on his hand was used alongside the release of the original 1998 N64 game. Illustrated by artist Yusuke Nakano, the iconic art graced everything from Nintendo magazines of the era to the official Ocarina of Time Player's Guide by Nintendo Power (via Internet Archive), and it's incredible to see it in toy form all these years later.

Young Zelda appears to be rocking out her own unique pose, but as a pair, they're still undoubtedly detailed and adorable figures I can't wait to add to my collection. As it stands, I'll have to be a bit more patient to pre-order them myself, as both Young Link and Young Zelda have yet to appear on UK retailers. However, I've still gathered the links you'll need below once they drop, alongside which retailers you can visit to secure your new amiibo today if you're on the US side of the Lake Hylia fishing pond

I instantly clocked the classic art homage of the Young Link amiibo when it was first unveiled during the Nintendo Direct held yesterday. As a 90s kid and a hardened Zelda fan, the image of Link looking at Navi has been long etched in my brain for decades. While I'll have to get used to this new version of Link with his busy-looking tunic, I'm pretty excited to add this iconic pose to my Zelda merch collection - but I can't help but wish they chose different artwork as inspiration.

One of the most standout classic pieces of Ocarina of Time artwork features Young Link and Zelda sitting side by side. That would have been more fitting, particularly as Nintendo could have designed it so that the amiibo bases could fit together to get the pose just right. Ninty recently showed with its Splatoon Raiders amiibo that it can release figures that connect together, so it could have been a possibility for these two. But alas, I'm happy with any new Ocarina of Time amiibo, particularly as we've only had two so far - one of Young Link and one of Adult Link holding the ocarina, which is now in the Princess's hands this time around.

If you aren't an Ocarina of Time fan, the recent Nintendo Direct also included a reminder that the Mineru's Construct amiibo pre-orders are up for grabs. This figure is the first of the line-up to be articulated, which makes it one of the most unique amiibo in the Legend of Zelda line-up.

• View all Legend of Zelda amiibo at GameStop

Check out our Legend of Zelda Ocarina of Time Remake pre-order page and where to buy the Legend of Zelda Nintendo Switch 2 and Switch 2 Pro controller while you're here.

Two new amiibo are on the way for Ocarina of Time remake, and they look fantastic - but what they unlock is seriously weirding me out.

Revealed during the latest Nintendo Direct livestream, these figures depict Young Link sitting on a stump with Navi the fairy and Young Zelda as she plays what I think might be the Ocarina of Time itself. As with all amiibo (and particularly the Legend of Zelda range like the new Mineru's Construct that just went up for pre-order at Amazon), they're impressively detailed so could be sold as mini statuettes in their own right... but that's just the tip of the iceberg, because they also unlock in-game items. In this case, deeply cursed masks of their former selves.

Yes, you'll be able to wear a mask of original Link or Zelda in all their polygonal glory after using these amiibo in the Ocarina of Time remake. Judging by the stream, there won't be any other benefit - just the ability to parade around in a chilling facsimile of their faces with one hell of a dead-eyed stare.

While I understand the idea in principle, there's something unsettling about the execution; besides it feeling odd for Link to run around Hyrule wearing his old face like a pint-sized version of Michael Myers, it's jarring to see the crisp, highly detailed character model under a pixelated mug with edges so sharp they could cut someone.

Still, at least the amiibo themselves are fantastic. The attention to detail is every bit as meticulous as you'd expect from modern amiibo, and Link is a fun nod to the past. Taking a break on a log while Navi the fairy perches on his hand, this image is pulled directly from artwork for the original game. That makes it a neat ode to N64 Ocarina of Time that anyone who grew up with the game will appreciate.

This wasn't the only merch unveiled during the stream; besides the reveal of a new Lego Link and Epona kit, Nintendo just showed off an electronic Master Sword to accompany new Legend of Zelda Ocarina of Time Remake, as well as a playable ocarina. These are shaping up to be some of the best Legend of Zelda merch already...

• See all Legend of Zelda amiibo at Amazon

Nintendo has just announced a whole swathe of new The Legend of Zelda merch pieces in its 40th Anniversary Direct, but among them sits an electronic Master Sword that looks to continue a long line of gorgeous replicas. We don't yet know what electronics will be included in the Master Sword toy, but Hasbro originally teased something sword-shaped was coming back in July.

Of course, if wielding the greatest sword in Nintendo's history doesn't excite you, the brand has plenty more planned to accompany The Legend of Zelda: Ocarina of Time's remake later this year. In its direct, Ninty also showed off a collaboration with Huzzle for two Master Sword and Hylian Shield figures, available in either full color or gold, as well as its own playable ocarina and Hori's new electric ocarina.

Finally, we were once again shown the three Heroes of Hyrule figures previously announced at Comic Con. The Link, Princess Zelda, and Ganondorf poseable figures are due to release in Spring 2027.

So far, we've been championing Proplica's iteration to any Master Sword enthusiasts who ask. This is a similar "electronic" variant, with its own sound effects and rumble features powered by two AA batteries. Complete with its own sheath and stand, the Bandai version has been the gold standard for some time now, at a $199.99 (GameStop) price tag. Hasbro's equivalent is a lot cheaper at $42.99, but it's also less detailed. Rather than a true 1:1 replica, this is more of a casual shelf piece; it's only 27 inches long and features 15+ sounds activated by movement and impact. A button is hidden on the back of the hilt, presumably to activate all this. It'll be available to pre-order from Wednesday, September 9 at 10AM PT / 1PM ET on Hasbro Pulse, Walmart, and Amazon, with an estimated release date of Spring 2027.

Aside from Hasbro, Hori was another name that popped up in the 40th Anniversary Legend of Zelda Direct. The "electric ocarina" had us scratching our heads at first, but now that Hori Store's official product listing is up we know a little more about what this gadget wants to do.

Compatible with Ocarina of Time's voice recognition feature, and can be used in-game to wield the power of Link's songs yourself. Don't want to do the heavy lifting? A secondary mode looks like it can also run through all the songs for you as well. Whether or not Hasbro's Electronic Master Sword has any similar in-game benefits remains to be seen.

• See all Legend of Zelda accessories at Amazon

We're also bringing you all the latest Super Mario merch and the latest details on the Lego Legend of Zelda Link and Epona set as well.

A new Lego Legend of Zelda set has been announced in a blink-and-you'll-miss-it reveal during the latest Nintendo Direct livestream.

As is only right considering the imminent release for Ninty's Ocarina of Time remake, the latest kit depicts Link and Epona striking a heroic pose on a small slice of Hyrule Field. This one isn't like the other Lego Legend of Zelda sets so far, though; rather than being a diorama with the usual minifigures (as seen in the Final Battle set that hit the Lego store earlier this year or the now-retired Lego Great Deku Tree), it's one of the company's larger 'big' figures.

There's no word yet on when this kit will be launching, though. In fact, we don't even know this model's price. However, we can make an educated guess. Lego doesn't typically show off kits too far ahead of launch, so if I had to guess, I think we'll see this one hitting shelves in early October, November, or December.

From what I can tell, this model may not have to be displayed with Epona rearing up. The bottom of her hind legs and the knees of her front legs seem to be hinged, so if I had to guess, you can probably pose her however you like. (The base certainly looks big enough to accommodate all four hooves being on the ground, if barely.)

I think it's a similar story for Link. His arms, hands, and head look as though they can be twisted, though based on the angle I can't be sure about the legs. It's possible he'll take a leaf out of Lego Luigi & Mach 8's book in that his top half is flexible, but his bottom half isn't.

Either way, this kit looks pretty manageable no matter whether you're coming back to Lego for the first time in years, have never built a set, or are a veteran of many models. While it's hard to gauge size from a screengrab, you can hazard a good guess based on the pieces used. Judging by the jagged two-stud pieces around Epona's hooves which usually weigh in at around 16mm long, I think this model will be between six and ten inches tall when reared up.

No matter what, we should find out precise details soon. Keep a close eye on Lego for more in the coming weeks.

This wasn't the only cool collectible to appear during the Nintendo Direct stream; Nintendo announces electronic Master Sword to accompany new Legend of Zelda Ocarina of Time Remake, as well as a playable ocarina.

• See all the latest sets over at Lego

The chances of us getting an official Lego GTA 6 set are slim to nil (something tells me it doesn't fit the toy-maker's family-friendly vibe), so seeing a fan-made version is such a tease for what could be.

Creator hachiroku24 has taken matters into their own hands by making a model inspired by GTA 6, and I'd go so far as to say it's a homerun. I've got no notes; whether it's the high-speed chase or a spot-on version of the logo towering over everything else, this thing is perfect. If there was going to be an official Lego GTA 6 set for Lego's 18+ range, I'd want it to look like this.

On the reddit thread showing off this model, Cherego sums up my thoughts perfectly with "If this would be an official set, I'd buy it [in] an instant." RobberySuspect agrees, adding "Oh my god I love the design you nailed this!" (As you can see for yourself below, hachiroku24 really did.)

The kit shows protagonists Lucia and Jason escaping the law on a speedboat while the cops are left high and dry against a backdrop of palm trees. It's understated, but nails a key part of the Grand Theft Auto experience without taking the easy way out; rather than resorting to a chaotic five-star shootout, it sells the franchise's blend of action, taboo luxury, and danger in a much more subtle but effective way. It's the kind of scene I could see playing out at the beginning of the game, before the logo appears against the city skyline.

Speaking of which, this set then goes one better and adds a GTA 6 logo hovering overhead. Besides the font being pitch-perfect, the gradient colors help sell those sun-kissed Miami vibes. (It's up there with the best Lego sets so far as looks go.) A lot of fans on the reddit thread seem to agree, with numerous comments praising just how accurate the font is. "Looking at this on mobile I thought the background was printed and the model was in the foreground," nocolon writes. "Absolutely mindblown after expanding the image. That’s incredible."

This level of skill won't come as a surprise to long-term Lego fans, though. User hachiroku24 is well known for making incredible homebrew builds, and they recently dreamt up an incredible Lego Final Fantasy set, not to mention a Lego Pokemon kit that's good enough to look official. I'd argue this is their finest work yet.

Unfortunately, these kits and the Lego GTA 6 set aren't official models you can buy – and in the case of Grand Theft Auto, they likely never will be. Hopefully hachiroku24 releases some instructions, so we can have a go at making it ourselves…

Lego Astro Bot leaks as a free gift for the PlayStation kit, and I kinda wish it was being sold separately.

• See all the for-adults display sets over at Lego

We've just got our first look at a leaked Lego Astro Bot set, and fans are already heartbroken that it may not be widely available.

It's been rumored for a long time that the new PlayStation kit (which already has hidden secrets I think fans are gonna love) would come with a free Lego Astro Bot model when bought direct from Lego, and it seems that hunch was on the money. The kit has been shown off early on reddit via Essential Japan, and the common consensus is that it rocks.

"This is too good to be just a GWP [gift with purchase]," TheLimeyLemmon writes. User donkeyrocket agrees; they responded that Astro Bot "Took my interest in the [PlayStation] set from 0 to 100." That's understandable; because it's a gift with purchase, you won't be able to get Lego Astro Bot separately, and it'll only be available for a limited time while stocks last. Considering how it challenges some of the best Lego sets for cute-factor alone, that's a bit of a bummer.

A really cool kit being relegated to freebie status isn't new. Indeed, a Sega Genesis controller was up for grabs last year… but as a gift with purchase, it wasn't easy to get. As jackos puts it on the reddit thread mentioned earlier, Astro Bot may be "One of the most egregious GWP hostage situations ever."

I don't know about you, but I'd certainly buy it if it was sold separately. If it's real, this kit exudes charm and personality despite being so simple (it doesn't seem to be made up of many pieces). The fact that it comes on a stand with the logo attached also makes it feel like a complete entity rather than a fun extra like some GWPs.

No matter what, it's not been confirmed that Astro Bot will be packaged alongside the PlayStation model. However, after those leaks and this first glimpse, I wouldn't be surprised. I suppose we'll just have to wait until Lego PlayStation goes live on October 4 (or October 1, if you're part of the free Lego Insider program) to find out.

In other news, fans are loving the new Lego Wallace & Gromit, but the same can't be said for Buddy the Elf.

• See the latest kits at Lego

Lego can't keep making the same sets forever, and unfortunately Lego Nightmare Before Christmas has had its number called – it'll be retiring in just a few months. That's why one of its best ever discounts has me doing a Jack Skellington impression and asking "what's this?"

You can currently pick up Lego Nightmare Before Christmas for $40 less than usual at both Amazon and Walmart, and while that may not sound jaw-dropping in itself, this is actually the cheapest it's been in a long, long time. Because it's due to retire (e.g. stop production/no longer be available) in December, the offer has arrived as an early Christmas gift for fans of the Tim Burton movie.

This model is actually three kits in one; you're getting that iconic curled hill above the graveyard Jack visits at key points in the film, Jack's house, and the town hall. These can be displayed together and connected in one continuous scene, or separately. There are also a handful of minifigures; Jack, Sally, the Mayor, Santa, and the trick or treater kids (Lock, Shock, and Barrel). There's even a little Zero the ghost dog.

I put this kit together shortly after it came out, and walked away deeply impressed at how well it manages to capture the crooked, off-kilter design of the beloved movie. At first glance, it shouldn't work; parts of it feel too top-heavy to be practical. However, Lego's designers have worked some magic to replicate that Burton-esque off-kilter look in a way that'll stand the test of time without collapsing under its own weight. Don't get me wrong, Jack's house isn't going to like being moved unless you take great care while doing so (I learned this to my detriment). But the actual structure is surprisingly sturdy, and some clever elements like off-center supports have been added to make it feel more warped than it actually is.

Yes, I'm disappointed Oogie Boogie wasn't featured here as a minifigure. But that's really my only criticism of this set. As a massive fan of Nightmare Before Christmas, I think it does a great job of honoring the source material.

While there's a chance this offer will return for Black Friday and end-of-year sales, I'm doubtful we'll see a much better bargain. This is the largest cut we've seen in at least a year, at least according to price-matching software like CamelCamelCamel. Plus, from experience, stock will start to evaporate after the retirement date of December 31 – that's certainly what happened to the Lego Great Deku Tree earlier in 2026. I don't want to sound alarmist, but I would be a little wary of waiting too long if you're keen to pick this model up. From my years writing about Lego, I'm not convinced we'll see a much better saving before it's gone.

Speaking of nostalgia, a new Lego PlayStation has been revealed with hidden secrets I think fans are gonna love.

• See the latest kits at Lego

Sony has officially revealed a Lego PlayStation set, recreating the original retro console in surprisingly interactive detail.

Shown off during the latest State of Play stream, this kit is made up of nearly 2,000 pieces and is a near-1:1 replica of the system that kicked it all off in 1994. It isn't just a display piece to look at, though; it has 'working' buttons, one for power and another that actually opens the disc tray. Rather than a disc, though, the Lego PlayStation is hiding something else under the hood: it contains two dioramas based on a couple of its most iconic games, Gran Turismo and Ape Escape.

Lego PlayStation will be available direct from Lego on October 4 (or October 1 if you're a member of the free Lego Insider program). You'll also be able to get it via PlayStation as of October 1.

Other console sets (like the recent Lego Sega Genesis kit) have been quite a lot smaller than the real thing, but Lego PlayStation bucks that trend by being close to actual size. That gives it room to fit those two tiny scenes inside. Gran Turismo's diorama is a miniature race track featuring scaled down cars, while Ape Escape is a lush island course. These mini-builds can be removed and displayed separately alongside the Lego PlayStation model; you pull away the sides to remove them from the main system.

That extra real estate allows the PlayStation controller model (which can be detached or attached via the front port) to be much more accurate too. One criticism we had for the Genesis set was its controllers being too small to do their inspiration justice, and it was an even less flattering comparison due to Lego releasing a separate, larger Genesis controller as a gift-with-purchase in 2025. This version of the PlayStation handset feels so much more accurate, though. And considering how much of a logistical nightmare it must have been to match that instantly-recognizable, curved shape with Lego bricks, hats off to the design team.

Frankly, the only thing this model's missing is that power-up sound when you turn the console on...

The one thing I've seen fans questioning is the use of Ape Escape. While it was a staple of the original PlayStation, there are arguably more iconic options. (Plus, as noted by our own retro expert Phil Hayton, having Ape Escape here without recreating the DualShock controller it required is an odd choice.) Fans on reddit have been quick to point this out, but they've also wisely noted that the lack of dioramas for IP like Crash Bandicoot, Spyro the Dragon, or Final Fantasy VII is likely due to licensing issues. redDKtie sums it up nicely on the same reddit thread by observing that "Crash and Spyro are owned by Microsoft now. And idk how easy it is to secure the Final Fantasy 7 license for this kind of thing. So those weren't likely."

What do you think of the kit? Will you be picking up the Lego PlayStation when it hits shelves in October? Let me know in the comments.

This isn't the only nostalgic throwback from the brick-makers next month; fans are loving new Lego Wallace & Gromit, but the same can't be said for Buddy the Elf.

• See the latest Lego kits at Lego

Fans have long suspected it, but it's now official that new Lego Harry Potter sets based on the upcoming HBO series are brewing.

Revealed via the Back to Hogwarts livestream that went up in time for September 1 (AKA the day Hogwarts students traditionally return to school in the books and movies), the toy-maker confirmed that it was indeed working on a series of Lego Harry Potter sets inspired by the HBO show. While we don't know what those will be just yet, the teaser did give us our first look at the new minifigures for Harry, Ron, and Hermione. Plus, co-host Rhianna Dhillon noted that these sets would be coming "so, so soon." I guess that means we can expect them to hit the digital Lego store shelves in the not-so-distant future.

In terms of the trio, Harry's wearing the new Gryffindor Hogwarts uniform while Hermione and Ron are in their civilian getup. While Ron seems to have a new hairpiece that more accurately represents the actor playing him in the HBO series (as does Hermione, though hers is very similar to previous models), Harry seems to have exactly the same face print and hair as older minifigs.

This raises an interesting point. Even though the show has a different visual design to the movies, it's gonna retread old ground already covered by Lego by necessity. Are we going to get slightly tweaked versions of older sets as a result? Fans on reddit are certainly wary of this, with user BlueAraquanid sarcastically noting that "Oh my god guys are we gonna get another hogwarts castle? Maybe finally get a ford Anglia? If they make enough seasons we could even get a buildable dobby! This might be lego’s most creative and innovative theme yet." (We have of course got multiple Hogwarts Castles, Ford Anglias, and Dobbys already.)

I also wonder what this means for kits based on the movies. Will they take a backseat in favor of the new HBO models, or are both ranges going to be launched simultaneously? I suppose we'll have to wait and see.

There's plenty kicking off for brick-builders this week; fans are loving new Lego Wallace & Gromit, but the same can't be said for Buddy the Elf, and a host of awesome new Lego sets just launched for September.

Although she is not involved in the development of Lego Harry Potter sets, GamesRadar+ acknowledges the role of J.K. Rowling in the creation of the Wizarding World, as well as her publicly-stated views regarding the rights of transgender people. If you'd like to offer your support to the communities affected by Rowling's rhetoric, consider donating to the National Center for Transgender Equality in the US, or Mermaids in the UK.

• Check out other new sets at Lego

Even though we're only just creeping into September, this year's Disney Halloween merch is already rising from the grave. The sun may still be blazing and it feels as though Fall is way down the road, but make no mistake: spooky season is beginning to emerge from its crypt like an impatient zombie.

A lot of brands have started to summon the spirits their merch as a result, and that includes a full Disney Halloween collection. We're talking multiple pages with hundreds of items on the Disney Store, ranging from cute Mickey-themed sweaters to creepy decorations from the Haunted Mansion. (It's like that super-effective Pokemon Halloween merch drop, but on a far larger scale.) To help you sort the treats from the tricks, I've rounded up my favorite items right here.

While we're seeing some reruns of last year's goodies, I'm not sorry. I adore the Mickey Pumpkin Wreath that's been reanimated for another year, for example, and it perfectly recreates the decoration seen on Main Street USA lampposts in Disney World. However, that isn't to say there's plenty of new stuff. I particularly like the Minnie ornament that has her waiting by a lamppost and some pumpkins. It's the perfect blend of cute 'n' spooky that really works for Disney.

Without further ado, here's a curated collection of my favorites. Welcome, foolish mortals, to this year's brew of Disney Halloween merch.

Strange things are afoot this spooky season, because it turns out you can transform a Lego pumpkin set into the Millennium Falcon...

• See all the 2026 merch at the Disney Store

The community seems to unanimously agree that a new Lego Wallace & Gromit set is amazing… but that Buddy the Elf leaves something to be desired. I guess Lego giveth, and Lego taketh away.

The toy-maker has finally pulled back the curtain on Lego Wallace & Gromit after it won a fan-design challenge to become a real set, and I've yet to see a bad word said about this model online. Whether it's the clay-like figures or very reasonable price for a set of this size ($99.99 at Lego, or £89.99 in the UK), the ode to Aardman animation is hitting all the right notes. I've been very vocal about how I don't think humanoid figures work very well in Lego form, but this kit? Wow. It makes me want to eat my words.

Which brings us neatly to Lego Buddy the Elf, which you can see for yourself on the Lego store. I don't want to dogpile this model because it's already getting plenty of that online, but let's just say it hasn't received a glowing reception. Criticisms range from the fact the model "doesn't look enough like him" (via IndianaJoes on reddit) to how it seems as though he's flipping the bird.

Speaking of birds, one thing everyone can agree on is that the included puffin looks perfect. (They're right, it does.)

"Buddy vs Wallace and Gromit… The duality of buildable display figures," writes thriftstoremando on the same reddit thread. You can judge for yourself below.

Fortunately, the reception to Lego's other Christmas sets has been far more warm. The new "Santa's Holiday Countdown" kit at the Lego store is adorable, showing St. Nick climbing down a chimney which doubles as a calendar. He's joined by a scaled-up Mrs. Claus big figure, a collection of adorable ornaments, a classic stocking accompanied by a toy soldier minifig, and a "Santa's Sleigh Adventure" with the big man himself, Mrs. Claus, and a couple of reindeer. There's a lot of choice if you want to decorate your home with Lego this festive season, and it makes me excited to see what the company has cooked up for its annual addition to the winter village range.

Like the look of these models? All of them hit shelves on October 1, 2026 – including Lego Wallace & Gromit.

In the here and now, the best new Lego sets in September 2026 are cracking; there's everything from a fantastic Spongebob kit to the Enterprise bridge.

• See all the latest Lego kits at Lego

Lego produces enough kits each month that its release schedule is eclectic at the best of times, but the best new Lego sets in September 2026 are enough to give me whiplash. A pineapple house under the sea sits alongside a magical model that laughs in the face of physics, followed by a one of cinema's most iconic cars... which isn't what it seems. Captain Kirk, Gremlins, and Doctor Doom follow close behind, because of course they do. (It's like the start of a really bad "...walked into a bar" joke, isn't it?)

In short, there's a lot going on - and I'm here to break down the very best new Lego sets in September 2026 so you know what to prioritize. You'll find my top picks below, and I've selected the ones I think are most interesting based on my years covering the best Lego sets. Want the bigger picture instead? No problem. You'll find every single model releasing this month further down the page.

There's certainly a lot to take in. Besides Star Trek, Batman, and Spongebob Squarepants, Lego's also releasing its advent calendar range in September. If you want to secure one ahead of the holiday season, it's worth jumping in early; some of the most popular ones sell out long before December.

Naturally, we aren't just getting three new Lego sets in September 2026; 17 kits are hitting the shelves. I've listed each and every one below, providing a better overview of what's on the way. With the exception of the Batmobile, each kit will arrive on September 1.

BrickHeadz

DC

Editions

Harry Potter

Icons

Marvel

Minifigures

Other

It's been a busy few weeks for Lego; besides a new Lego Star Wars kit that is the longest set ever made, it revealed the first Lego Super Mario minifigures.

• See all the latest Lego sets at Lego

Despite its self-aggrandizing name, Lego The Mighty Bowser isn't overexaggerating; it really is an impressive monster of a kit. Actually, I'd go so far as to say it's one of the best Lego sets ever made.

Or at least, it was. This behemoth has now been retired, which means it's becoming harder to get hold of now that Lego has stopped producing it. In fact, it'll only be available so long as stock lasts at third-party retailers like Amazon. Because Lego The Mighty Bowser is one of my all-time favorite models, consider this a plea – if you love Super Mario, consider this set before it vanishes into the ether forever.

Lego The Mighty Bowser (#71411) features

This enormous figure is easily the most detailed and accurate Lego version of Bowser available… and that includes the new Lego Super Mario range. Although it's not to-scale with the interactive Mario figures, it should sit nicely alongside the Mario Kart set as well as the Lego Luigi and Mach 8 kit. They seem roughly the same size.

In terms of what this model can do, it isn't just a pretty face; its head, arms, hands, fingers, mouth, eyebrows, and eyes can all be moved for some quite distinct poses. Lego The Mighty Bowser also shoots a fire bolt from his mouth at the push of a button.

Build

Despite the size and apparent complexity of Lego The Mighty Bowser, I generally found it to be a straightforward project. It doesn't have many small fiddly bits, and the build develops in a very logical way. I was able to make quick progress as a result; it only took me around five hours to finish across a few evenings. I suspect it could last up to 10 hours if you're not as experienced with building Lego, but it's not a mammoth project like Lego Rivendell.

However, I do have a bone to pick with designers here. The instructions don't put the usual lines around pieces you're supposed to be adding, which makes seeing what to do next a (very frustrating) game of spot the difference. I missed certain pieces as a result, and had to go back a step when things weren't adding up.

Design

This is the most impressive figure in the Lego Super Mario range, no questions asked. Sure, the Mario Kart figures are great and the old question block is soaked in nostalgia. The Lego Piranha Plant is full of character, too. But none compare to The Mighty Bowser. It's the sort of set that'll elicit a "woah" when seen in person, and is a dead ringer for its on-screen inspiration.

The fact it's so posable gives it a real sense of life, too; it's easy to personalize how Bowser looks on the shelf, and those moving eyes (a rarity for Lego figures) really help with that expressive nature.

Because it's so sturdy, you won't have any trouble adjusting it on the fly either. Sure, it won't stand up to rigorous play from younger fans and is most definitely a display-only kit. But it's far more robust than other models of this kind, such as Lego Optimus Prime.

Finally, I adore that the themed base feels like a slice of Bowser's castle. It melts into the background compared to the King Koopa himself, but brings back memories of those boss battles if you look closer. The stone 'cracking' under Bowser's weight is a particularly nice touch.

Should you buy Lego The Mighty Bowser?

Because this kit is going to the Mushroom Kingdom in the sky and will become increasingly difficult to find, I'd recommend grabbing it sooner than later if you were at all interested. While it's possible we'll get a new and improved version down the line, that's far from guaranteed.

So long as you can find it at a reasonable price, I think it's pretty great value too. There's nothing else like it in Lego's repertoire, and even though issues with instruction clarity let it down, everything else shines.

Buy it if...

Don't buy it if...

For more collectible recommendations, don't miss the best Super Mario merch or our guide to the best toys.

Pokémon is coming to your wrist, no not in the Pokemon Go wearable we've all been asking for for years, but in the form of a special edition Fitbit Air. Google announced the collaboration today, bringing a Snorlaxian blue aesthetic to its 2026 release with a launch date set for September 15 and pre-orders live right now.

The $129.99 device originally launched back in May as a lightweight health tracker built with Gemini's AI features in mind. The Pokémon Sleep version functions exactly the same as a regular Fitbit Air, just with that relaxing blue colorway and an appropriately snoozy Pikachu stamped onto the strap. Everyone's favorite electric-type stands out against the background with a yellow border design, shared by the Pokémon Sleep logo to the right.

If you already have a fitness tracker, it's worth noting that most mainstream models already support all the same Pokémon Sleep integration features. There aren't any additional sleep tracking bonuses to be found in this special edition, Pikachu's for vibes only.

Pokémon Sleep tracks your rest each night, before rewarding that slumber with new creatures for your Sleep Style Pokédex. The game side of things has you researching different Pokémon sleeping patterns, all while keeping Snorlax berried and happy. Again, most fitness trackers already integrate directly with the app via iOS or Android, the new Pokémon Sleep Fitbit Air is simply an extra statement piece.

I wouldn't be surprised if this was a hit, though. The run on Pokémon merch is relentless - in just the last few weeks we've had resellers charging ridiculous amounts for free donut boxes, and the Pokémon Polaroid camera pre-orders recently sold out in just a couple of days as well. If you're a major fan and have been meaning to pick up a fitness tracker anyway, this is one to jump on sooner rather than later.

The Fitbit Air is a lighter tracker. You won't find the in-depth metrics of more premium, screen-based devices here. However, it's positioned well as a screen-free alternative to expensive Apple Watch, Garmin, and Fitbit Charge wearables.

Pikachu's app seems to be a good fit here as well. Many opt for the Fitbit Air specifically for its sleep tracking. Its low-weight, breathable design looks to keep it comfortable. Some reports state that it's not quite as good at automatic workout tracking, and can miss some activities. It also lacks the GPS features of more sophisticated smartwatches as well.

• See all fitness trackers at Amazon

For more pocket monsters, check out where to buy Pokémon TCG 30th Celebration cards as well as all the upcoming Pokémon Halloween merch.

There's a hidden Lego Millennium Falcon in the new Star Wars set, but you'll need to break out your magnifying glass to spot it.

The Executor Super Star Destroyer was already making headlines as the longest Lego set ever made, but it's got a fun secret: the galaxy's greatest hunk o' junk, hidden in plain sight. If you look closely at the 6,130-piece kit (which you can see at the Lego store listing), you'll spot a tiny Star Destroyer floating on a stand beside it. Zoom in on one of the lifestyle photos and you can just make out a teeny Millennium Falcon hiding on the miniature Star Wars set.

Fans quickly spotted this on reddit, and considering the thread's 9.2K upvotes, I'd say folks are keen on the idea. "Finally, a 1-piece Falcon build!" reflechir jokes. "The micro build falcon crown has been won," adds Stryker_T. Seeing as the Falcon is printed onto a clear single stud of around 5mm in this build, I think they're right.

This is obviously a reference to Empire Strikes Back, where Han Solo and co park the ship on the back of a Star Destroyer to evade pursuit. It's a really neat little Easter egg that you could absolutely miss at first glance, but should put a smile on most fans' faces when they look closer. I thought it was a representation of the Star Destroyer's shield generator at first before zooming in and clocking what it actually was. Considering how someone recently turned a Lego pumpkin into the Millennium Falcon, I feel like I'm starting to see the ship everywhere.

Will there be other hidden secrets in the Executor set? Almost certainly. Most kits of this size squirrel away fun references within the build, like Lego Rivendell putting the Eye of Sauron under its council chamber or the Lego Disney Castle featuring a literal hidden Mickey.

I don't know if we can expect as many hidden secrets with the revamped range, but there are plenty of references in the new Lego Super Mario sets (which add minifigures for the first time).

• See all the latest sets at the Lego store

The Lord of the Rings is a series packed to the gills with iconic moments and visuals throughout its 682-minute runtime. But if you ask me, the most iconic of all came from the first and best film (an opinion I'm sure nobody would disagree with), Fellowship of the Ring. Lego The Lord of the Rings: Balrog Book Nook (#10367) showcases that moment, when Gandalf decides he's going to solo the mighty Balrog while the rest of the squad runs off, and utters those four iconic words that are now forever etched onto that Lego tile: "You shall not pass."

This iconic Middle-earth smackdown is the one of the latest to join Lego's 'Book Nook' series. And while others in the range feel more packed with details, the star of the show this time comes courtesy of the titular Balrog, which is a very in-depth posable figure. In fact, three of the nine bags of bricks included in this Lego Balrog Book Nook set are dedicated solely to the construction of the creature.

However, the trade off is that the majority of the set just simply isn't quite as exciting, and you'll be spending the majority of your time constructing the frame that holds the scene together.

Lego Balrog Book Nook (#10367) features & design

The main draw of The Lord of the Rings: Balrog Book Nook (#10367), is naturally, its form factor. The showdown between Gandalf and the Balrog can be displayed nestled within your books on a shelf, or, if you fancy, you can let the Balrog spread its wings and make the arena a bit more open. Although in doing so the fact that this isn't exactly a set that's filled with detail may be more apparent.

You have a new Gandalf The Grey minifig (it's different to the one featured in Lego Rivendell AKA one of the best Lego sets around) which comes with a staff and sword combo, with a grey set of pillars adorned with flames around the side. The Balrog's wings slot into this frame allowing it to display its might in both configurations, plus it has a fiery whip to even the odds somewhat.

Build

Ultimately, given its symmetrical design, the book portion of the build is the least interesting. While the final product looks good, it does become a bit of a drag as the build goes on. Plus, I found some of the smaller pieces and the flames to be a bit fiddly.

The building of the Balrog took me about 2 hours by itself, and while there are some awkward bits on some of the smaller details, such as the 1x1 slope tiles on its head and some of the mechanics of the legs' tube pieces, it proved a far more satisfying build, and makes for the highlight of this set.

Design

The Lord of the Rings: Balrog Book Nook (#10367) build can be siloed into two parts. First is the 'book' which takes the form of some detailed pillars of grey bricks, and the second is the Balrog itself, which is the undeniable highlight. The figure naturally towers over Gandalf and has pretty fantastic articulation across its limbs, wings, mouth, and claws. My only real nitpick is the plastic sheet included for the wings as opposed to built wings, but even then I can't say it bothered me too much, although exercise caution while putting it together, as it's that same flimsy material that feels like it'll rip if you blow on it.

The Balrog however is a bit awkward in the book. It has no room for studs on its feet and so it's held in by the pipe pieces on its wings, which allow it to fold them in when the book is closed.

Should you buy the Lego Balrog Book Nook (#10367)?

I really like The Lord of the Rings: Balrog Book Nook (#10367) set. But there's some major caveats. First of all, for the $130 / £110 price point, it is a bit bare. It's the same price as the far more detailed Sherlock Holmes and Dumbledore's Office Book Nook sets, and while Lord of the Rings is the far better series of the three in my opinion, you are basically paying for a big Balrog figure.

If you'll be using it for its intended Book Nook purpose? It looks great nestled in a book case, but the bare look does make it a bit less of a must have if you'll be displaying it open.

Buy it if...

Don't buy it if...

How we tested the Lego Balrog Book Nook

This review sample was gifted to me for my personal collection.

I built The Lord of the Rings: Balrog Book Nook (#10367) over the course of two nights in two two-hour sittings. I've had it displayed both in a bookcase and among other places in the house, always checking on the opening and closing mechanisms.

I've been a big Lego guy over the last few years, and this is my first non-Super Mario set I've built (well, aside from Sonic Green Hill Zone and the Game Boy, but still). While I'm not the biggest Tolkien die-hard, I've watched the Peter Jackson trilogy a number of times, and have a soft spot for those old school animated movies, because where there's a whip… there's a way.

For more collectibles, why not check out the best toys?

A new Lego Star Wars model has been crowed as the longest set the toy company has ever made.

At more than 53.5 inches/136cm long, the Executor Super Star Destroyer kit outstrips other famously huge models like the Lego Titanic (which is a 'mere' 53 inches). Considering how it's 6,130 pieces in total, this is also one of the biggest Lego Star Wars sets around.

To hammer home that monstrous size, this version of the Executor features a to-scale Star Destroyer as well. Considering how big that ship is supposed to be (as demonstrated by models like the Lego Imperial Star Destroyer), it gives a sense of just how bloody massive its big brother is. Fans have even spotted a hidden Millennium Falcon within the kit, underlining the Super Star Destroyer's staggering length.

This isn't just an enormous scale figure like the Lego UCS Venator, though; it also comes with a mini diorama scene recreating the bounty hunter lineup Darth Vader recruits in Empire Strikes Back. This is actually the first time all six of those bounty hunters (including Boba Fett and IG-88) have been included in one Lego set. We've seen their minifigures separately, but never together.

While this isn't the first Lego Executor (we had a colossal Ultimate Collector Series version back in 2011 and a smaller, mid-scale alternative a couple of years ago), it's by far the most impressive. It's certainly up there with the Lego UCS Millennium Falcon and the equally humungous Lego Death Star that launched late last year. Much like the latter (which was one of the biggest and most expensive sets ever made), it also holds a record of its own as the new longest-ever Lego set. I guess Star Wars kits are trendsetters now?

You'll be able to get the kit direct from Lego as of October 4, 2026. However, members of the free Insiders program can grab it early from October 1. Until then, perhaps it's worth making room for this enormous model...

It's a busy day for the brick-maker from Billund, because it just showed off the new Lego Super Mario range as well – and proved it's more than just minifigures. In other Star Wars news, someone turned a Lego pumpkin into the Millennium Falcon.

• Check the current Lego Star Wars range at Amazon

We just got our first look at the new Lego Super Mario range, and it turns out that the toy-maker isn't just adding minifigures to the lineup in early 2027; this appears to be a top-to-bottom overhaul.

Unveiled via the Lego store and GamesCom 2026's show floor after being teased back in March, these kits range from small models featuring just a few characters to massive sets that are several hundred pieces strong. Besides nodding to iconic pieces of Mario history (including a Mario Kart selection, Bowser's Castle, and the obligatory warp pipes), all kits include the stars of this new Lego Super Mario range – minifigures. Before now, you could only get larger interactive toys and display pieces like Lego Luigi & Mach 8. By contrast, the new kits are classic minifigures and feature in playsets using standard Lego bricks.

This new range is set to launch on January 1, 2027. Here's a full rundown on what's going to be available next year:

Honestly, I'm impressed with what we have so far. These kits pack a lot of charm, and crucially, they can be mixed with other Lego playsets due to their standard size. (This wasn't possible before due to how big the interactive figures were.)

The question is, what does this mean for those interactive figures going forward? Lego hasn't elaborated on whether the new minifigure sets will run alongside or replace them entirely. However, I think it's interesting to note how the new Lego Super Mario sets recreate some existing models – namely the Mario Kart range and Bowser's Castle. Because these seem a lot less expensive, don't require the fuss of batteries, and match the size of other Lego kits, they're certainly appealing as an alternative.

I would be sad to see the back of the interactive Mario range because it allows kids to create elaborate courses their figures actually react to (in terms of pure interactivity, they're some of the best Lego sets). But I also think these 'traditional' minifigure playsets are long overdue.

If this is the future of the Super Mario line, I'm not mad about it.

It'll be interesting to see what the community does with this new range – it's incredibly creative, as demonstrated by one builder using a Lego pumpkin set to make a Millennium Falcon.

• Check the current Lego Super Mario range at Amazon

Buffy the Vampire Slayer Monster High dolls exist.

That's a sentence I never thought I'd get to utter. Yet as someone who grew up wishing they were a chosen one and who spent every Halloween dressed as every Sunnydale local under the sun, it's a phrase I'm glad I can say. It's not even just a Buffy who has got the Monster High makeover, but a two-pack featuring both the Slayer herself and Angel. It's set to drop on September 4 at 9 AM PT.

The $98 / £89 set will be exclusive to Fang Club members next month and available only from the Mattel Creations website. However, Mattel states that they "may also be available at other retailers." Personally, I'd not take the risk of waiting, as there's no certainty they'll appear elsewhere. As a self-identifying member of the Scooby Gang, I'll be sitting by my phone the day they drop, and if you don't want to have to fork out your cash to the real-life vampires that are resellers, I highly recommend you do the same to avoid any balderdash and chicanery.

Over the past year, there's been new Buffy merchandise, from official Loungefly bags to multiple pairs of pyjamas, but a set of Monster High Buffy and Angel Dolls feels best suited to represent the iconic '90s TV show. Think about it: Buffy the Vampire Slayer practically championed the 'monster of the week' TV formula, so there's nothing more 'Monster'-adjacent than Buffy.

Not only does the meshing together of the Monster High and Buffy worlds make so much sense, but the end result is fantastic. Mattel has captured Sarah Michelle Gellar's likeness pretty well, and there's no mistaking those green-gray eyes and blonde hair for anyone else. Buffy's outfit design, too, seems to capture not just the early era of the series, but also later seasons of the show.

Her black jacket and red leather trousers combo harkens back to 'Graduation Day Part One' episode from Season 3. Over the years, it became synonymous with the Slayer and was pretty much my friend and I's go-to choice for depicting her when Halloween came around. Yet, her doll's heels include parts of her iconic scythr/m? weapon, which you didn't see until the final seventh season.

I can see Mattel's choice to reference different Buffy eras being a deal breaker for many fans, but I personally don't mind it. I would have preferred to see Summers in her white prom dress and jacket combo as seen in the last episode of the first season. However, I imagine her updo may have been a bit more difficult to style on a doll, though it would have felt more fitting alongside Angel.

Talking of which, a lot of fans are not happy that he's included. The comments under Bloody Disgusting's X (Twitter) post of the reveal are filled with disgust that Buffy's OG beau is part of this two pack set, with user's like @Mayara__1D exclaiming, "The Angel turned out super ugly, dude! Where's the Spike? Lmaoooo."

I am more of a Spike girl myself, and would have loved to see his iconic beaten-up leather jacket in doll form. However, I'm not mad to see Angel in his stead. Particularly as I was a fan of the Angel TV show spin-off, and as Mattel went so far as to include his Claddagh ring.

The Moore Action Collectibles Buffy the Vampire Slayer figures from back in the late '90s included a replica of that exact ring with the Vampire Angel doll, and I used to wear it every day to school. Catching a glimpse of the tiny versions on these dolls filled me with a wave of nostalgia that will never put me in the Team Angel camp, but has made me eager to add his doll to my collection.

Who knows, the popularity of this set could result in more Buffy dolls down the line. I don't know about you, but I'd adore a Monster High release of Willow. It would feel super fitting as the brand's new Moonspell Magic range is all about witches, and there's no cooler and more iconic witch than Willow. Not to mention, she sported plenty of iconic outfits during the TV show's seven-season run.

If you're okay settling for Buffy and Angel for now, remember that you'll need to be a Fang Club member to order the two-pack come September. You can grab an annual membership for $9.99 at Mattel Creations, which will give you access to these dolls and allow you to vote on new creations.

• View all Skullector Monster High dolls at Mattel Creations

Want more Monster High? Check out the Monster High Skullector Ghostbusters Gozer Doll, which is still available through Mattel Creations.

The Good Smile Company seems to be hoping that love is in the air, because a Love and Deepspace Nendoroid figure is on the way.

Although it's not a full range (yet), we are getting a Sylus figure for our trouble. The leader of the Onychinus criminal organization has been transformed into an adorable Nendoroid figure with a handful of accessories like his mechanical crow Mephisto, and even though this version is pint-sized, it still captures the Love and Deepspace love interest's personality rather well. Just look at that sly smile.

The figure is available to pre-order now from Good Smile Company ahead of a mid-2027 shipping date, estimated to be between April and June. Prefer to shop elsewhere? You should also be able to pick it up from Entertainment Earth in the US or via Forbidden Planet in the UK, though the option to pre-order there isn't available yet.

As with most Nendoroid figures, this one is highly posable thanks to extensive articulation and a stand that lets you show the toy off however you choose. It also has a couple of different expressions (sly, smiling, or neutral), and features a few accessories to pose with – Mephisto, battle effect parts, and a ruby gem.

We'll have to wait and see whether more Love and Deepspace figures are inbound; as of right now, it looks as though Sylus is the only one. But considering the game's popularity, not to mention the, er, enthusiastic following for each love interest, I'd be surprised if we didn't see more down the line. After all, fans were passionate enough that the game canceled a character recently.

No matter what, I'm sure they'd be great. We'd argue that Nendoroids are some of the best toys around, and the fantastic Wind Waker Link is still my white whale…

Steamy lover boys aside, it's been a spooky week in the world of toys; someone turned a Lego pumpkin set into the Millennium Falcon, and the new Pokemon Halloween collection is super effective.

• See all Nendoroid figures at Amazon

Pokemon Polaroid pre-orders are hitting the shelves, and you can now claim your own Pikachu, Sylveon, or Pokeball instant camera. Not only that, but if you're not keen on the $99.99 cameras themselves, there's a whole host of accessories to snap up, starting from just $14.99. Wondering where to buy these adorable snappers? You're heading straight to the Polaroid Store.

This is where we're seeing stock landing en masse right now, and there's still time to scoop up your Pokemon Polaroid pre-order. As evidenced by the fact that empty Pokemon donut boxes are being flogged online by resellers, it's a jungle out there where Poke-merch is concerned.

That's why I've rounded up the first spots you should hit when pre-ordering Pokemon Polaroid cameras and accessories ahead of their full October 5 release date. This should allow you to beat any potential rush and stay ahead of the curve.

No matter what's caught your eye, I'd recommend moving quickly. Polaroid itself promises that you'll only be able to pre-order them "while supplies last." Once they're gone, it looks as though they may be gone for good.

Polaroid Go Gen 3 (Pikachu Edition)

Polaroid Go Gen 3 (Sylveon Edition)

Polaroid Now Gen 3 (Poke Ball Edition)

Polaroid x Pokemon accessories

Pokemon Polaroid FAQ

Looking for more cool Poke-gear? Here's where to buy Pokemon TCG 30th Celebration. The new Pokemon Halloween merch also seems to be super-effective, because it's already starting to sell out.

• See all camera offers at Polaroid

The Lego DC Arkham Asylum (#76300) is the fourth mainline set based around Gotham’s notorious psychiatric hospital, and by far the largest. Next to Wayne Manor and the Bat Cave, Arkham Asylum is arguably the most famous location in Batman lore. And yet, it didn’t appear until Batman #258 in 1974. Since then, it’s featured in numerous DC comic books and movies, starred in Grant Morrison’s acclaimed Arkham Asylum: A Serious House On Serious Earth, served as the inspiration behind Rocksteady’s legendary Arkham Trilogy of Batman video games and is, of course, a playable location in Lego Batman: Legacy of the Dark Knight.

Part of what makes Arkham Asylum so enduring is the link the location has with Batman’s extensive rogues gallery. And indeed, Lego has used this release as an excuse to include a whopping 16 minifigures: nine villains, four members of the Bat-Family, two guards, and Catwoman. In fact, there’s technically 17 minifigures, if you include a defaced statue.

While Lego’s previous renditions of Arkham Asylum have been facades, this latest incarnation is a Lego modular building. This means it features a 360-degree exterior, a full interior, and can be attached to other modular buildings to create a seamless diorama or incorporated into a wider Lego city. At a whopping 2,953 pieces, it’s easily the best Lego Arkham Asylum to date. But is it capable of holding Gotham’s most wanted? Or will a subpar design allow them to run riot?

Lego DC Arkham Asylum (#76300) features

• 2,953 pieces
• 18+ age rating
• 16 minifigures

The Lego DC Arkham Asylum (#76300) costs £269.99 / $299.99 and comprises 2,953 pieces, yielding a satisfactory price-per-piece ratio, especially when compared to many Lego Star Wars sets. Just don’t expect it to compare to non-licensed modular buildings like the Lego Icons Natural History Museum (#10326) and Tudor Corner (#10350).

The set can arguably be compared most closely to the Lego Marvel X-Men: The X-Mansion (#76294), which retails for £289.99 / $329.99 and features 3,093 pieces and 10 minifigures. However, price-per-piece ratios aren’t everything. Taking into consideration rising prices and the fact that Lego sets tend to get heavily discounted nowadays, I think Arkham Asylum is an expensive set, but it feels like an expensive set. It stands tall, looks good, and features a huge roster of minifigures.

Lego DC Arkham Asylum (#76300) build

• Seven-to-eight-hour build
• Familiar modular construction
• Lots of fine details

This set comprises 3,093 pieces, split across 24 bagged sections and two instruction manuals. You get a neat bit of blurb at the beginning of the first manual, which not only explains Arkham’s history but also the 14 heroes and villains found within the set. It took me roughly seven hours and 40 minutes to build at a leisurely pace, and bar a few fiddly sections, it’s relatively easy to put together. The biggest challenge is patience, due to the large size of the set and abundance of small pieces.

You begin by putting together the prison van, which is a tidy, if unambitious, little vehicle. The rest of the build is fixed to Lego’s standard 32x32 modular building baseplate, with the structure being built from the ground up. The foundations and exterior tiling come first, followed by the front steps and main entrance. You slot a plate 1x1 round with bar (#6227897) into a brick 1x1 with stud on side (#6062574) and position the latter diagonally to achieve the necessary angle to attach the entrance (and what will later be built upon to create the central tower). This is fiddly, but a neat solution to a difficult problem.

Some interior details are then added, before building up the secure vault, some walls and then the main cell block on the ground floor. The cell doors are operated via a very simple sliding mechanism that features no elastic bands or gears. Once the top of the first floor is tiled off, you move onto the exterior fencing and the front gates.

The gates are the first section that present something of a challenge. I found it a little fiddly to ensure all of the posts were slotted in evenly and when adding the Technic beam at the top, it’s very easy for it to skew or slide too far down the gate. There aren’t many printed pieces in this set, but I do really like the pair of printed 1x1 tiles that represent locks, clipped onto the front of each gate.

With the prison van, ground floor and exterior finished, you then move onto the second instruction manual to tackle the first floor and roof. The first floor comes together much the same as the lower floor. You also build up the central tower above the main entrance, which continues to prove fiddly but ultimately looks the part. Interior details follow to kit out Dr Quinzel’s (Harley Quinn's) office. The walls are built up and the upper cells are constructed, featuring a similar mechanism to open/shut the sliding doors.

The guard tower, which sits atop the vault, comes next and then it’s time to build up the roof. Once that’s done, the final bag contains the statue that sits above the main entrance and the ‘Arkham Asylum’ arch that sits atop the front gate. This rather cleverly uses a piece of curved rollercoaster track, with six clip-on square 2x2 tiles (#6323189) attached to the track and used to accommodate stickers with the ‘Arkham’ lettering.

Overall, this is a fun build that’s challenging in places, but time is largely spent simply laying down Lego bricks. It’s a fun set to put together while watching a film or listening to a podcast because it only occasionally requires your full concentration. But it’s not just the size and piece count that justifies the 18+ age rating.

There’s lots of fun to be had by posing the various minifigures in and around the set, but the structure itself has limited playability. Accessing the interiors by removing the room and first floor can also be a bit fiddly, and younger Lego fans could easily drop or break sections of the structure.

Lego DC Arkham Asylum (#76300) design

• Compatible with other modular buildings
• Full interior over two floors
• 70 stickers!!!

Despite being one of the most iconic locations in Batman lore, Arkham Asylum changes dramatically depending on the comic book run, film, or video game in which it’s depicted. As such, the designers kind of had carte blanche to build a functional representation of the location in Lego form.

This is a fine-looking set from the front. Photographs really don’t do it justice – I think it looks even better in person. That said, it doesn’t really feel like Arkham Asylum around the back and the right-hand side. Personally, I wish the designers had leaned a little harder into the gothic architecture.

Arguably the most famous incarnations of the asylum are Grant Morrison and Dave McKean’s Arkham Asylum: A Serious House On Serious Earth graphic novel and the first entry in Rocksteady’s incredible Arkham trilogy. In both instances, the main building looks more archaic, and I do wish that had been represented a bit more here.

It’s also a shame there’s no upper-floor roof interior. I own the now-retired Lego Marvel Sanctum Sanctorum (76218), which remains my favourite licensed modular building. Its gorgeous interior is split across three floors (including the roof) and I feel that was a missed opportunity here. Still, there was a lot for the designers to cram into Arkham Asylum and two holding cells, an admission room, office space, maximum security vault, control tower, foyer, and corridors is a lot considering the available space.

I’m also a fan of the large gated entrance and courtyard. This isn’t wasted space; it really adds to the aesthetic. Would I have preferred a few hundred more bricks dedicated to a larger roof space and a possible roof interior in place of the prison van? Possibly, but this is still a great-looking set that’s bursting with character.

And even if the gothic aesthetic isn't as consistent as I'd like, I was still impressed by the sheer level of detail. There's a hole being dug out from the bottom-right cell, climbing ivy spilling out onto the building’s exterior from Poison Ivy’s window, Joker graffiti sprayed over the Arkham statue above the main entrance, and a bent section of fencing that's been smashed through.

As you’d expect from a licensed modular building, there’s a lot of stickers (I counted 70 in total!). And many of them boast neat little Easter eggs or references for hardcore DC fans, such as the ambulance's number plate, which reads B258, referencing Arkham Asylum’s first appearance back in Batman #258. There's also a “Spoon missing?” note on a pin-up board, referencing a utensil which is actually being used to dig out of a ground-floor cell. Oh, and don't forget the newspaper on a desk that reads “The Batman Returns,” complete with a tiny image of the front cover of Frank Miller’s legendary miniseries The Dark Knight Returns.

I’m not a fan of stickers, but I have no problem with this. There aren’t as many printed pieces as I’d like, but Lego can’t print everything. What I’m not a fan of is unnecessary stickers, and there are several of those on the exterior of the building. The roof is the most egregious example, with three stickers themed around Harley Quinn, Penguin, and Riddler. They’re supposed to be graffiti, but they just stick out like a sore thumb and kind of cheapen the aesthetic.

The roof also features two stickers representing boarded-over holes and cobwebs. This could have been represented by physical pieces and really doesn’t do the set justice. It’s not as if this is a boring-looking set that needed to be jazzed up. It’s got plenty of character and detail, not to mention the huge roster of 16 minifigures to pose in and around the building. There’s enough vibrant comic book fare to satisfy anyone without resorting to unnecessary stickers.

I’ve also noticed more of my Lego stickers have been prone to peeling lately. After only a few days, the sticker on the water tank on the roof has peeled off. This isn’t an isolated incident, because a few stickers on my Lego Star Wars UCS Jango Fett’s Starship started to peel off within days, too.

Kudos to Lego for supplying a truly monster selection of minifigures. The Lego DC Arkham Asylum (#76300) features 16 minifigures, which is seven more than the aforementioned Sanctum Sanctorum, three more than the more expensive Lego Harry Potter Gringotts Wizarding Bank (#76417), and it even beats the Lego Lord of the Rings Rivendell (#10316) by a single figure. And it’s a great lineup, too. The Bat-Family is the highlight, with lovely representations of Batman, Robin, Batwoman, and Batwing. Hardcore DC fans will likely recognise the fifth Robin, Bruce’s son, Damian Wayne, fan favourite Batwoman Kate Kane, and the second Batwing, Luke Fox.

Some of the villains are naturally a little less impressive, with Penguin, Harley Quinn, Scarecrow, Bane, Killer Croc, and Joker in their prison fatigues. Every figure is technically exclusive to this set, apart from Mr Freeze. Exclusive figures aren’t always entirely exclusive. Sometimes they simply have a different headpiece or torso print, making them exclusive by technicality, but a lot of the minifigures here are unique enough to be considered proper exclusives, which is great.

We have seen Joker, Penguin, and Harley in (albeit different) orange jumpsuits before, but not the other villains. Joker’s face print isn’t new, either, but the other villains are all sufficiently unique. I’m a fan of the new Poison Ivy with a great headpiece and lovely printing. And although Harley’s donned an orange jumpsuit before, this variant has bags of character thanks to a face print with a pink bubblegum bubble, as well as her trademark carnival mallet and roller skates.

Riddler is another nice representation in full villainous garb, but Bane, Killer Croc, and Scarecrow are a little more disappointing. I do think it’s a missed opportunity that either an oversized Bane or Killer Croc wasn’t included, especially as a giant hole has been punched through a wall on the ground floor. Bane even sports a backpack with his Venom serum. The two guards are standard fare, but with nice torso prints. But it’s a shame we didn’t get a Mr Freeze update, because I really don’t think this is Lego’s definitive Freeze offering.

When it comes to the Bat-Family, Batwoman has a new torso print and a lovely new red cape. Robin also gets a really nice yellow cape and for the first time ever, we get a Batman with an asymmetric cape. I have to say, while this might not be the best cape for play, it’s perfect for display. It looks really dynamic and super cool – straight from a million Batman comic book covers. Bruce’s torso isn’t an exclusive and neither is his cowl, but he’s a solid-looking Keaton-esque figure that’s a shoo-in for one of the costumes in the recently released Lego Batman: Legacy of the Dark Knight.

Selina Kyle’s Catwoman is my pick of the bunch. She’s another all-new figure with some great printing, and in my mind, is a little bit of an Easter egg for fans of the Arkham Trilogy, closely resembling her appearances in Arkham City and Arkham Knight. She also comes with a little printed tile of kitty snacks, which is a neat touch.

What would have been my pick of the bunch is Batwing. Not only is this the first time he’s been represented in minifigure form, but he’s a true premium figure with exquisite torso, hip, leg, and foot printing, as well as a lovely grey cowl with blue eyes. However, his backpack requires a sticker and I firmly believe that minifigures should remain entirely printed.

You'll also find two little buildable penguin figures, as well as a hidden 17th minifigure in the form of the Arkham Statue. This is a great touch, with two face prints: a normal one and one with Joker graffiti sprayed all over it, which is a great touch.

Should you buy the Lego DC Arkham Asylum (#76300)?

Lego has set the bar very high indeed with past modular buildings and while I don’t think the Lego DC Arkham Asylum (#76300) quite makes the pantheon of all-time-great modulars, it’s still an incredible Lego Batman set. I do wish that it leaned a little more into the gothic aesthetic, had fewer stickers and a roof interior, but this build still looks fantastic in person, and is bristling with detail and character.

What really makes it stand out is the huge selection of minifigures, comprising some of Batman’s most notorious villains and foils. This allows you to dress the set for display, showing the inmates taking control of the asylum as the Bat-Family fights back. For a licensed set with this number of minifigures, it’s competitively priced, and if you can eventually find it on sale, it’ll become even more enticing. Ultimately, as a first modular building for the Lego Batman theme, this is an excellent start. I’m keeping my fingers crossed for a modular Wayne Manor in the future.

Ratings

Buy it if...

Don't buy it if...

How I tested the Lego DC Arkham Asylum (#76300)

This review sample was provided by Lego.

It took me multiple sittings to build the Lego DC Arkham Asylum (#76300) over a period of seven hours and 40 minutes. It sat in my study for a couple of weeks and was ‘played with’ during the photo shoot, where I moved the set around, accessed the interiors and posed the various minifigures.

Not only have I been collecting Lego since the ‘90s, but I’m an avid fan of the caped crusader and collector of DC graphic novels. Billund and Batman are a match made in heaven for me!

For more information on our procedure, take a look at how we test products.

For more collectibles, don't miss the best toys.

It's getting to the point where I'm convinced you can turn any Lego set into a Millennium Falcon if you try hard enough, because someone has used a pumpkin kit to create Han Solo's iconic ship.

Created by Minute_Food_2881 on reddit, this alternate build takes the new Lego Halloween Pumpkin Lantern set (which costs around $29.99 via the Lego store) and uses it to make a festive version of the galaxy's most recognizable freighter. Sure, it looks a little squishier than usual and that is definitely a ghost instead of a cockpit. But this Lego set is unmistakably the Millennium Falcon, spooky or not – and it joins a long line of kits people have managed to turn into the ship, to the point it's become a meme amongst the community.

The creator hasn't left instructions for us to copy their homework, but it doesn't look as though they've used any extra pieces beyond what comes in the box. The photo clearly shows individual studs and bricks too, so I suspect you could replicate the design if you had this image up as a reference. Seeing as it's smaller than many of the best Lego sets, it shouldn't be too much of a headache to figure out either.

I shouldn't be surprised that Minute_Food_2881 was able to do this. They're famous for creating alt-builds using existing Lego sets, from Pokemon like Charmander (using the same pumpkin set, actually) to a Warhammer 40K battleship. However, they're best known for turning things into Millennium Falcons. They've used Back to the Future models, Technic sets, and more to recreate the fastest hunk o' junk in the galaxy, so I guess it tracks that they could use a pumpkin as well.

It's shaping up to a big couple of months for Lego; the Lego Star Trek Enterprise Bridge set boldly goes back to the original series with shields up and tribbles ready, and fans agree new Lego Batman Returns Batmobile looks great.

• See all new sets at the Lego store

Fortnite now features Sonic the Hedgehog and friends, which is a surefire way of dragging me back to spending weekends in pursuit of that shiny Victory Crown. Yet, unless I'm playing duos, I don't have a good track record of actually becoming victorious.

Being able to show off a winning streak is a bit of a rarity, but with Toy Sapien and Hot Toys Japan's upcoming Victory Crown (1/1 Scale) replica, at least I can pretend I'm a winner. The $199.99 (BigBadToyStore) collectible is exactly what it says on the tin: a recreation of the in-game crown, which is set to drop in the US and UK in November later this year. While adding it amongst the best toys in my collection won't help me get good at Fortnite any time soon, I can make believe I've claimed that Victory Royale, which is the next best thing.

Toy Sapiens and Hot Toys Japan could have easily gone down the route of just recreating the shiny, golden crown and called it a day, yet a lot of thought has been put into this Fortnite collectible. The 13 cm wide by 20 cm high gold-colored crown with its piñata centerpiece is there and looks fantastic. However, the brand also went the extra mile to include a red velvet pillow for it to sit on, just as it appears in the game.

For those who have not managed to be sucked into the world of Fortnite and may be unaware, this pillow is found in the Crowning Achievement emote. You can earn said emote by winning a match twice in a row (while wearing the crown), and it's fun to use and show off to strangers. The emote displays the number of times you've won, though it will stick to zero if you haven't won anything - the scenario I'm more than familiar with.

By including the pillow, you can grab this collectible and recreate the emote, which is a really neat inclusion for a replica toy. Of course, no number emits from the crown, so it's not exactly like the real thing. But that's probably for the best if you're eager not to annoy your real-life friends as much as strangers online.

As an extra neat detail, the toy includes a custom-designed stand to make it easier to prop up amongst the rest of your merch collection. The official Toy Sapiens website states that the stand features a "golden llama symbol in the center of its clear acrylic plate" which you're unlikely to see once the pillow is in place, but it's an appreciated addition nonetheless.

Talking of appreciated detail, the toy includes access to an in-game outfit. Each Victory Crown, no matter where you buy it from, includes a redeemable code for the "Deadeye" skin to use in-game, which used to be accessible all the way back during Chapter 2, Season 1, according to FortniteGG. The skin isn't the coolest I've seen after years of playing Fortnite, but I'll take a free ghostly cowboy-looking outfit over nothing at all.

Unfortunately, neither the crown nor the pillow makes the same sound as the emote or produces any music or sound, period, like the Bandai Tamashii Nations Master Sword replica from The Legend of Zelda, which is a bit of a bummer. When it comes to replicas, I personally prefer ones that emit audio, and it's an extra I would have expected for a $199.99 collectible. However, sounds or not, I'll take what I can get. I'm just thankful the Victory Crown replica exists at all, especially when Fortnite toys are often aimed towards younger fans rather than adult collectors.

• View all Fortnite toys at Amazon

Check out Hasbro's upcoming Rumi Sain-Geom Premium Electronic Sword if you love replicas.

I took one look at the 2026 Pokemon Halloween collection and let out a loud groan. Make no mistake: my bank account is in danger.

The official Poke-store tends to hit the mark where quality is concerned, but those hits turn into bullseyes with spooky season. The 2026 Pokemon Halloween collection (which you can see in its entirety at the Pokemon Center) is no different, and there are multiple pages of "oh no, I want it" merch ranging from mugs to cozy sweaters. No matter whether you want to decorate home or you'd like the best Pokemon merch with a touch of the eerie this fall, there's no shortage of options.

Some of the cooler items are already selling out (I've seen themed plushies fly off the digital shelves), so fellow GamesRadar+ Poke-merch fan Rosalie and I have rounded up our favorite Pokemon Center Halloween collectibles for 2026. Personally, I'm a big fan of the Pikachu Pumpkin String Lights as well as the Gengar Cardigan. An eerie ambient glow never fails to deliver on Halloween atmosphere, while the latter looks hyper cozy. They're just the tip of the iceberg though, so I'll need to hide my credit card if I want to have any money left over this spooky season...

For more cool collectibles, don't miss these China-exclusive Pokemon TCG figures (they've ruined my entire day).

• See all the 2026 merch at the Pokemon Center

Alright, that does it; we're now at the stage where a "Lego" OG Xbox you can't play games on costs what I'd pay for a real console right now. Yes, somewhere under $400 is what I think is reasonable even for the new 25th anniversary Series X, given that it launched six years ago, but apparently if you want the latest machine that can play games (wild, I know), it might cost near a grand.

I guess I see the humor in Mattel showcasing its Brick Shop OG Xbox Lego alternative in the same week as devastating 25th Anniversary Series X25 price leaks. There's only so long you can chuckle at potentially paying $899 for what is really just a translucent Series X with the same core performance and features. What's that? You scraped together 400 bucks for a current-gen system? Oh, that's enough for a retro console model since that costs $329.99.

There's a joke to be made about the Mattel Brick Shop Xbox model leaving you with $70 spare for a game, but I don't think I'm even in the mood. I have friends who deliberately held off from buying a Series X or a PS5 back in 2020, and it now feels like they're financially and functionally barred from a console update this generation. By the latter, I mean that they've got less reason to opt for a PlayStation since Sony is also abandoning physical games.

I can't help but feel like both Mattel and Microsoft are both ramping up MSRPs with no real basis. The toy maker previously released an Xbox 360 3:4 scale building block model with a $150 MSRP, and while it's slightly smaller, it's got the same lights, sounds, and detailing as the new kit. I should also point out that while that set was technically MEGA (previously MEGA BLOKS) branded, the company says it's a different product, but it absolutely feels like a brand pivot for the sake of premium pricing.

On the Microsoft side of things, the console maker is contending with the same component pricing issues as everyone else. Still, the RAMageddon ramifications aren't an excuse to release a new colorway of your console that's $400 more than the launch version. Yes, the OG Xbox vibes make for a nice 25th anniversary, but that's somewhat spoiled by the fact that the majority of players can't afford to come to the party.

The skinny here is that it should be the Series X25 that costs $329.99, and the Lego kit alternative OG Xbox should at least be the same price as its 360 predecessor. The $899.99 price tag would give me the ick slightly less if it featured souped-up performance like the PS5 Pro, but even that would spark indigestion symptoms.

If you need me, I'll be playing PS2 games in the attic where the pretend consoles for over $300 and near $1,000 machines can't hurt me.

• Xbox consoles at Amazon
• Lego gaming sets at Amazon

Take a look at the best retro handhelds if you need a gaming machine that's remotely affordable.

It took me a second to realize that the Lego Xbox was not, in fact, Lego at all.

In honor of the original console's 25th anniversary, Mattel Brick Shop has produced a 3,000-piece model that recreates the system in all its glory alongside the 'Duke' controller and vignettes from three of its most iconic games. This 'Lego' Xbox also goes one better than many of the best Lego sets by adding controller-activated lights and sounds for these scenes, which is very impressive.

The PR blast promises that this brick-built console is "packed with interactive features, hidden details and memorable tributes," and after a quick glance through the promo pictures, I'm sold. It nails the console's silhouette perfectly and is a dead ringer for the OG controller, yes, but that's not what wins me over so much. No, it's the fact that the console opens up to reveal miniature dioramas lit by LEDs and basking in game-appropriate soundtracks, which are turned on by the controller itself. Lego has hidden scenes in products like the Lego Atari 2600 before, but not with added lights and audio. That's one hell of a step up.

However, I don't think we should roll out the red carpet yet. It is a lot of cash after all, even if the price is pretty standard for Lego/construction models of this size and complexity.

Curious about the Mattel Brick Shop itself? That's fair – it's a new name on the scene, having only been established in 2025, and there's some confusion as to whether it's a rebrand of the old Mega line that put together the previous Xbox 360 kit. Officially, they're separate brands, with Brick Shop focusing more on high-end collector items rather than playsets.

It feels like nostalgia's in the air; just before news of this Xbox throwback dropped, fans were treated to a new Lego Batman Returns Batmobile.

• See all Mattel Brick Shop products at Mattel

I knew resellers were shameless and will do their level best to flog anything they can, but I didn't realize they'd stoop so low as to sell empty Pokemon Krispy Kreme donut boxes.

No, that isn't a typo; resellers really are attempting to shift cartons at an absurd price. I've seen some Pokemon Krispy Kreme boxes being listed for as much as $99.99, and honestly, my flabbers are gasted.

It's a similar story with the accompanying Poke-cups featuring Pikachu, Bulbasaur, and more. Getting a full collection can cost you well over $100 via eBay right now.

For context, Krispy Kreme just released a Pokemon collaboration with themed donuts based on the beloved pocket monsters. (More than one of our Editors can confirm that they are, in fact, delicious.) Because this is a limited-time drop and fans are going nuts for the tasty crossover, resellers have sniffed out an opportunity to make some easy cash by selling the remains at a ridiculous markup. Or at least, that's their hope; from what I can tell, very few of them are actually being bought. Faith in humanity restored.

These unscrupulous individuals are well known by fans of the best card games, and I can't say they have a good reputation. They typically scoop up all the TCG packs they can to move on with obscene price-hikes attached (which is part of the reason why it's so hard to buy Pokemon TCG 30th Celebration right now), and this means there's nothing left for actual players. In fact, the war on Pokemon scalpers now includes facial recognition checks in some stores in Japan.

"....so they're not just scalping Pokemon cards, but the EMPTY DONUT BOXES?!!?!? ...is having good things as a 90s nerd just NO LONGER ALLOWED anymore?!" Asks @DaJoestanator on X/Twitter. I can't disagree with that sense of disbelief.

In more positive news, the new Disney Lorcana digital game sounds like a cross between MTG Arena and Pokemon TCG Pocket.

• Skip the trash and find actual Pokemon merch at Amazon

Polaroid seems to have said "what if Pokemon Snap, but real," because it's dropping a handful of cameras based on the mega-franchise.

Designed to look like Pokemon or items inspired by the series, this Polaroid collaboration includes three models: a Pikachu design, a Sylveon version, and a more classic camera based on the iconic Poke Ball colorscheme. They'll be available to pre-order soon (on August 25) via the Polaroid store or Pokemon Center, and launch alongside a host of accessories like carry-cases this October.

Rather than being different colorways on the same camera, the Pokemon × Polaroid crossover modifies two separate designs. The Pikachu and Sylveon ones give the smaller Polaroid Go Generation 3 a Poke-makeover, while the Poke Ball model is a modified Polaroid Now Instant Camera Generation 3. However, all feature the same shutter button modelled after a Poke Ball.

The cool thing about the smaller designs is that they feature themed straps modelled after their inspiration; the Pikachu one has a charm made to look like the electric mouse's tail, while the Sylveon Polaroid features a strap borrowing the Pokemon's signature colors in a suitably wavy pattern.

All of the cameras come with film whose frames are based on instantly-recognizable pocket monsters, from Charmander to Bulbasaur. These are all protected by darkslides featuring custom Pokemon silhouettes.

You'll also be able to grab a few Pokemon-themed add-ons soon, or use them with an existing Polaroid camera. All are modelled after a Poke Ball; there's a Poke Ball strap, a camera case, and photo album.

Here's a breakdown of exactly what's available:

• Polaroid Now Gen 3 (Poké Ball Edition): $139.99 / £129.99
•  Polaroid Go Gen 3 (Pikachu & Sylveon Editions): $99.99 / £89.99 each
• Special Edition Film: Custom-themed i-Type Film ($22.99) and Polaroid Go Double Packs ($24.99) with themed frames and custom dark slides
• Accessories: Themed Go Camera Cases ($24.99), Photo Albums ($24.99), and universal Camera Straps ($14.99).

These items will go up for pre-order at Polaroid on August 25, 2026 ahead of a full release on October 5.

If you want more nostalgia-fuelled collectibles, fans agree this new Lego Batman Returns Batmobile looks great.

• See all the latest camera models and accessories at Polaroid

A Lego Batman Returns Batmobile is screeching onto the streets of Gotham next month, and the community seems in agreement on two things: that it looks awesome, but the lack of minifigures is a bummer.

The Dark Knight doesn't like to be upstaged by leaks, it seems, so Lego has come out swinging with a full reveal that shows off the kit in all its glory. Made up of over 2,000 pieces, the Lego Batman Returns Batmobile is a highly detailed display model that splits into pieces to reveal the Batmissle at the press of a button. It also comes with a very cool-looking Batman minifigure that adds his iconic over-the-shoulder cape for the first time, but this is where our problems begin.

"Great for anyone that missed the original, but the detail and single mini figure are a bit of a let down," writes A_Pointy_Rock at reddit. "The play function is neat, though." While I think the detail part is up for debate, this isn't the first time I've seen grumblings about the lack of minifigures; other fans have criticized this, and it's all because of the previous Keaton-era Lego Batmobile.

Back in 2019, Lego released a display version of the 1989 Batmobile for $250 – and it was glorious. This 3,308-piece model was a sumptuous recreation of the superhero's car, and it came with three minifigures in total (Batman, Vicki Vale, and Joker). I appreciate that costs have gone way up in the past decade, but because this new 2026 equivalent costs a similar amount for 1K fewer pieces and two less minifigures, I can understand some disgruntlement. After all, having Catwoman and Penguin alongside old Batsy would have really done the idea justice.

However, I do think the new version is excellent nonetheless. It's instantly recognizable as the Tim Burton Batmobile, and while the previous model is more detailed (with a scale that allows it to be more screen-accurate, I'd argue), this one still looks brilliant. The Batman minifigure might also be one of the best Lego's ever made, too; the hard plastic cape and cowl capture the distinctive Keaton costume far better than previous ones, and having the cape over the shoulders provides a striking silhouette.

Plus, it's not as though the older Lego Batmobile is available anymore. That model has long since retired, and it's impossible to find anywhere near its original price. As such, this is an opportunity for anyone who missed out on the 2019 kit.

What do you think of the model? Will you be picking it up?

If you prefer your superheroes to be of the wall-crawling variety, Spider-Man: Brand New Day artbook shows off the movie's secrets, alternate designs, and how the story was made.

• See all the current Lego Batman sets at Lego

SDCC has come and gone, but that feeling of wanting the best toys from the nerdy extravaganza never goes away. A lot of the time, these items are exclusive to con-goers, so I always expect to feel FOMO each time the annual event fades from view. But this year, my most-coveted item, the stunning Pokemon Team Rocket Cameo Mini Loungefly Backpack, was actually available to buy online, so it was time to prepare my bank account for trouble.

The $90 / £85 backpack was priced pretty similarly to other brand-new Loungeflys, so buying for myself felt like a no-brainer. That, and the fact that Pokemon's iconic, petulant villains are some of my favorite characters in the franchise. As a kid of the 90s, my friend and I were paid in sherbet straws to go around the playground and do impressions of the trio, and even as an adult, they hold a special place in my heart. I couldn't pass up the opportunity to have more Team Rocket in my life, and after taking it out for a spin, I highly recommend anyone else with a fondness for Pokemon, Loungefly bags, and not forking out cash to resellers, do the same.

I assumed that a design with a "convention exclusive" metal emblem on its side would be far more than £85 via the official UK Funko Loungefly online store, and yet I was pleasantly surprised. Well, surprised in the context of Loungefly pricing, as their usual $80 / £80 MSRP has never sat well with me. Whenever my Loungefly strikes up chat with fellow fans in the wild (it happens more often than you'd think), I always recommend waiting for sales at retailers like Magic Madhouse or TruffleShuffle rather than paying full price. A deal price of around £50 feels far more reasonable for what you get, but as an SDCC item, this bag was only available straight from Funko and was not going to see any savings before it sold out for good - so I did what I had to do.

That doesn't mean I'm not ecstatic with my purchase. This is a gorgeous bag, which features the anime duo Jessie and James straight on the front. It feels adult and elegant with its rose and Poke Ball motif over past Pokemon releases. It's the roses that drew my attention, as, of course, they're referencing James, who would frequently pose with one while reciting the iconic Team Rocket motto. However, as someone whose name is "Rosalie", there's a double meaning in there, which makes it feel like an extra special addition to my Loungefly collection.

A design that's perfectly fitting for adult fans

The rose and Poke Ball design doesn't just encircle Jessie and James, but it's found throughout the bag's interior lining. Even the black straps and lower half of the Loungefly are made up of the same delicate pattern. The photos I've provided and the official marketing images honestly don't do it justice.

I'm not sure if it was the intention, but the bag's look reminds me of an old Victorian piece of jewelry but with some Team Rocket flair, and I'm very much a fan of it. I was initially drawn to Loungefly bags as they're accessories designed with adult fans in mind, and tend to incorporate licensed art and IPs in a more unique way rather than just utilizing logos and calling it a day. This Pokemon release in particular encapsulates everything I adore about the line, and why my collection continues to grow at a faster rate than I, or my bank, can keep up with.

The bag isn't all about style over substance either, as you've got plenty of storage to play around with. I own a Loungefly Mini Backpack Bag Organizer Insert ($29.99 at Amazon) as it fits without issue in the main section of the bag. Not to mention, you've got a deep front pouch sitting behind Jessie and James, which I use to store sunglasses, spare makeup, and anything else I need quick access to in a pinch.

It's also managed to hold up well, despite being taken on a wild ride at the weekend. I always like to break in my bags as soon as possible, and this one went on a trip into the city of Glasgow, through the busy and claustrophobic Barras market, to a pub afterwards, and there wasn't a stain or mark left upon its surface. There's always a fear of taking new and pretty pricey bags like it out of the house, but it's a bag, and that's what it's for. As a collector, I have plenty of things that are meant to be left on a shelf, but this is meant to be taken out and shown off, and I loved every moment doing just that.

The only issue I experienced with the bag was that mine arrived in an awkward state. The Poke Ball and rose design I adore so much that surrounds Jessie and James was folded inwards, which I suspect was due to how it was packaged for me from the official Funko store. Judging from the marketing images, it's not meant to be this way, so be sure to inspect your bag when it arrives so you can ensure you're getting your money's worth. I've probably left it too late to give customer service a ring.

If you're holding off on buying this bag, I'd be wary that it might not be in stock for long. This is a "limited edition" release, not one you'll likely find in your local comic shop, and it's prime fodder for resellers. A quick scan of eBay.com right now brings up multiple listings requesting as much as $160 for a bag that's still in stock straight from the brand for $80. That's more evil an act than Team Rocket could ever muster.

I appreciate that you may not have almost $100 to lay down on a mini backpack, but if you do grab it and you're as big a Team Rocket fan as I am, you won't be disappointed. Just beware that at least one millennial will come up and talk to you about it when you wear it out in public, and make it double.

• View all Pokemon Loungefly bags at Funko

Want more Pokemon toys? Our toy expert, Benjamin Abbott, has rounded up the best Lego sets, which include appearances by some iconic Pokemon.

1

2

3

4

5

Shop the collection

Shop the collection

• 

  1

  Marvel

  Spider-Man Brand New Day 2026 Rooftop Comic Panel T-Shirt

  $20.69$22.99
• 

  2

  Golden Link

  Spider-Man Brand New Day Collectible Popcorn Bucket With Fandango Ticket

  $34.96
• 

  3

  Workman Publishing

  Spider-Man Total Universe Hardcover

  $60.00$80.00
• 

  4

  LEGO

  Lego Marvel Spider-Man Hero Figure

  $99.95
• 

  5

  Marvel

  Spider-Man: Brand New Day Wisecrackin’ Glow Mask

  $29.99

It's a Spider-Man kinda summer, so of course Marvel's going to make the most of it with a collection of new toys, collectables, and special editions. Disney's never shied away from a collab and with Brand New Day ticking off box office milestones one by one, why stop now?

Spidey fans were already eating pretty good with a whole bunch of red and blue gadgets to choose from, but the latest release has brought a whole new world of Spider-Man merch to enjoy. From comic collections spanning the original BND era to the official Brand New Day popcorn bucket, there's books, Blu-Rays, t-shirts, toys, and even phone chargers dedicated to Peter Parker.

I've swung through the digital aisles to find all the Spider-Man: Brand New Day merch worth grabbing this summer. Some is already available, but a few (like the Total Universe hardcover and the Collector's Edition Blu-Ray) are still in their pre-order stages right now.

We called the latest Spidey flick "Marvel Studios' strongest standalone outince since Endgame" in our Spider-Man: Brand New Day review, but if you're after something a little more interactive, check out our five-star Marvel's Spider-Man 2 review.

If you're still basking in the afterglow of Spider-Man: Brand New Day and are hungry for more from the MCU's resident webslinger, a new behind-the-scenes artbook drops today with early concepts, sketches, and designs showing how the movie's story developed from start to finish.

Considering how many characters are included in the runtime (ranging from expected cameos to genuine surprises), and how much the story changed over time, there's a lot to discover in here; it's apparently full of early designs and story ideas, not to mention alternate costumes from the beginning of development. While it doesn't include everything from the film (this book apparently doesn't include art for that mystery character, presumably to preserve the surprise in case of leaks), it's available for a few dollars less than normal via Amazon. That makes now a good time to grab it if you want it for your coffee table or are hunting down a gift for fellow Spidey fans.

Yes, it's a shame that the book omits a certain character who I'm sure you all know about by now. According to this reddit thread of someone who's been hands on with the tome, it sidesteps both them and the finale. That's disappointing, and there's no sugar-coating the fact. But I guess it's a casualty of the secrecy surrounding Brand New Day's major addition, and it looks as though there's plenty else to enjoy here.

Personally speaking, I adore coffee table art books like this and own quite a few from my favorite movies. I'm particularly keen on Star Wars ones because early development includes some truly wild alternatives, and Marvel versions are similar. They're usually a goldmine for fans because character designs and/or costumes can change so drastically over the course of production. Besides providing a cool "what if," it gives some fascinating insight into how things started and how this transformed into the movie we eventually got.

It's not the only Spidey-related product on offer right now, of course. The seminal comic run of the same name is also up for grabs at a discount, bringing it down to just $9.31 at Amazon. (Just don't expect the same story beats; even though it shares a title, this is a very different – though excellent – plot involving a lot of characters who don't make it into the movie.) And if you'd rather swot up on all things Spider-Man, this encyclopedia called 'Spider-Man Total Universe' details the character's history from inception to modern day and is $20 less at Amazon right now.

For more cool collectibles, don't miss the best Lego sets – these are some of the best around. That list is about to get longer, because leaks suggest a Lego Batman Returns Batmobile is on the way.

• See all Spider-Man: Brand New Day merch at Amazon

A Lego Batman Returns Batmobile set is on the way this September, according to leaks.

This kit (which recreates the Caped Crusader's ride from 1992's sequel starring Michael Keaton, Michelle Pfeiffer, and Danny DeVito) was apparently found in-store by a member of the Brick Tap community. It's unclear which store, but the model itself – which was shared via reddit – seems to be a large-scale display piece with over 2,000 pieces. Because the Lego Batman Returns Batmobile is said to launch on September 1, 2026, I'd expect pre-orders to go up soon via Lego.

You can get a better look of the model below, but it's a massive set at over 45cm/17in long that may cost $230. It's supposedly made up of 2,269 pieces, so is a pretty detailed recreation of the car as it appeared in Batman Returns (though long-term fans of the best Lego sets may take issue here, which we'll get to in a moment). However, that's not what makes this one stand out; there's a hidden feature, just like in the film. If you twist the engine exhaust at the back, the sides will pop off and reveal a smaller, sleeker car underneath. Plus, the minifigure accompanying this model is even more screen-accurate than we've seen before – it has a thicker cowl and hard plastic cape that goes over the shoulders, giving that iconic silhouette Keaton's Dark Knight is known for.

So, why might some fans be raising eyebrows? Well, we got a larger version of the 1989 Batmobile in 2019 for $250. The two are very similar models, but this older one is far larger with 3,308 pieces at 60cm/23in long. It also comes with three minifigures (Batman, Vicki Vale, and Joker) compared to the newer equivalent's one. I understand that prices have gone up in the seven years since then, but it does feel like quite a lot less model for a very similar cost.

Still, it does look fantastic – I don't think there's any arguing with that. If the leak is real, it's the perfect opportunity to pick up a version of the beloved car if you missed the now-retired 2019 model.

I'm just hoping we get other DC sets beyond Batmobiles in the not-so-distant future; it does feel as though Gotham's protector has been stealing the limelight recently. Though if recent rumors are true, we could be getting sets based on Superman next year…

This is far from the only cool kit we can expect to see in September; the new Lego Ministry of Magic kit is a gravity-defying set held up by what I can only assume is sorcery, and it's joined by a Lego Star Trek Enterprise Bridge set boldly goes back to the original series.

• See all the current Lego Batman sets at Lego

Kingdom Hearts is receiving a retrospective showcase at D23 2026, Disney's massive celebration for all the magic it's had its hand in creating, and I'm very excited. I've been obsessed with the series ever since a friend at school whispered to me in maths class a whole 22 years ago, "Hey, you know there's a game that crosses over Disney and Final Fantasy into one, right?"

That blew my mind as an obsessive fan of both, and ever since, I've longed to bask in as much Kingdom Hearts-ness as I can get my hands on. Yet, out of all the games and best toys that have alluded me the most, it's Bandai's Proplica Key Blade Kingdom Chain that I covet every single day. Like the rest of the Proplica line, it was a replica of Sora's iconic weapon that launched in April 2018 for 20,350 yen (roughly $127.80), and it not only looked like the real thing, but it lit up and even projected a key hole on the wall, so you could pretend you were sealing your own Disney world. It doesn't get much better than that.

Bandai went the extra mile by equipping their Proplica Keyblade with three modes: attack mode, magic mode, and key mode. Attack mode made the replica emit sounds from the game, so you could swipe at the open air and pretend you're Sora, hacking and slashing your way through hordes of Heartless.

According to Bandai's official blog post shared on April 26, 2018, holding down a button on the blade would result in a flow of sounds, or pressing it continuously would allow them to emit randomly. I'm not sure if, like the brand's Proplica Master Sword that I do have in my collection, the sounds correlated to your every movement, but if they were to give this a re-release, that'd be a neat upgrade to have from the get-go.

Besides attack mode, you had my favorite mode of all, magic mode, which is one of the key reasons (excuse the pun) why I covet this toy. With this mode, pressing and holding the button hidden within the blade's hilt would allow you to cycle through spells from the game, including Fire, Blizzard, and what the English-text version of the site calls sander, aqua, cial, and gravide. I can only assume that they're referring to Sora's Thunder, Cure, Aero, and Gravity magic. For the spells, the base of the blade glows the corresponding color, eg red for fire, blue for blizzard, and plays their in-game sound effect simultaneously. It's an incredible feature judging from the Bandai Tamashii Nations Proplica Keyblade YouTube video I was able to find online, which I only wish I could witness in person.

Key mode is likely the one other fans will fawned over at the time. As I mentioned above, it projected a keyhole on any wall or surface. That's not the best part, as holding the button will project it and play the sound effect that emits in the original game whenever Sora seals a Disney world. I'm a full-grown 35-year-old adult, but I can entirely foresee myself welling up with tears if I were to get this toy and witness this in person.

In fact, the entire thing would likely result in me becoming a teary mess, as I adore Kingdom Hearts and have dreamed of owning this piece of toy history. At the moment, my Proplica collection consists of Sheryl Nome's microphone from Macross Frontier, and the Master Sword, but it's the Proplica Keyblade that I've been yearning to own the most. The only problem is that it's long out of stock, is no longer being manufactured anymore, and can reach close to (and even over) $1K on eBay, and other second-hand websites. I don't have a thousand Munny to drop on a piece of merch alone, so instead I dream for a re-release that I can pre-order to prevent giving resellers the time of day.

If you thought you did see a re-release of this toy last year, you aren't entirely wrong. Bandai released a smaller, 20-inch Key Blade, which was available to pre-order for $146.99 at BigBadToyStore and comes with its own set of lighting and sound effects. While smaller than the older release, this version's Magic Mode emits lighting at the end of the key and has a Music Mode, which felt sorely missing from the older version.

The Music Mode allows the prop to play the iconic Dearly Beloved track, along with the 'Sora' song from the game series, which is pretty neat. I've known about this version for a while, but as much as I long for an official Key Blade replica, I ignored pre-orders simply for the fact that I wanted one that felt more true to size. Really, I should have just gone for it, as this is likely to become another Kingdom Hearts collectible destined as reseller fodder on eBay, but it just wasn't what I was looking for.

I have a dream of displaying my Proplica Master Sword alongside a realistically sized Keyblade crossed over one another on the wall, and something smaller just won't do the job. It's a silly nitpick, but here's hoping that if they can release another one, and Square Enix can release a replica of Kingdom Hearts Donald Duck's Mage Staff for $62.13 at Aitai Kuji, they can give the original another go. With D23 2026 incoming and Kingdom Hearts 4 on the horizon, who knows what the future holds.

• View all Kingdom Hearts merch at Amazon

Are you a big Disney fan? Check out what our toy expert Benjamin Abbott has to say about the Disney Castle Lego set.

Mario's younger brother is often stuck in second place compared to his more popular sibling, but not with the Lego Luigi & Mach 8 set. This model gives him the spotlight he deserves.

Honestly, this is a great model. Is it going to top a list of the best Lego sets any time soon? No, because I think the Mario equivalent looks just that little bit better. It's also more iconic. But considering how excellent Lego Luigi & Mach 8 is, that says a lot about the quality of the company's recent Mario kits. This is a fantastic design.

Lego Luigi & Mach 8 features

This is the second of Lego's 18+ Mario Kart display models; it follows hot on the heels of the Lego Mario & Standard Kart design from 2025. Rather than putting Luigi in another bog-standard vehicle, though, it gives him the kart he was closely associated with in Mario Kart 8 marketing – the Mach 8. This was introduced in the aforementioned game and feels like a jet turbine with wheels (it's got excellent speed but poor handling). This model nods to that idea with 'flames' pouring from the back.

Actually, it has a need for speed in general. The wheels move so it's able to 'drive' along, and they can actually be turned using the steering wheel itself.

As for Luigi, he's made to scale with the previous Mario set and seems roughly in line with Lego The Mighty Bowser. Don't expect him to stand alongside his brother and greatest foe, however. Luigi's legs are locked into a sitting position.

Build

Putting this model together was a more sedate experience than I'd expected. Despite the size, it doesn't bog you down with too many small pieces; you should be able to rattle through it quickly. It took me between five and six hours to finish.

OK, there are a couple of tricky bits around the head and face that require patience. But otherwise, it's a very straightforward build. Even if you're new to Lego or haven't made sets in years, you won't struggle with this one.

Design

It turns out that Lego's excellent Mario & Standard Kart set wasn't a fluke, because this one is equally great. So many large-scale Lego figures squat in the uncanny valley (remember the "I've seen things" Chewbacca, or even Lego Pikachu and Poke Ball?), but not Luigi. It's a dead ringer for the character despite being made of blocks and bricks.

Frankly, this is Lego showing off. The only thing that'd make it better is the option to straighten his legs so you can have a Luigi figure standing beside his brother and Bowser.

Actually, that's a lie; the only other thing it needs is the option to swap out his eyes to create the Death Stare Luigi meme. I mean, c'mon. It's low-hanging fruit, and would be the cherry atop the cake.

Should you buy Lego Luigi & Mach 8?

If you're building a collection of Lego Mario kits, have the Mario & Standard Kart already, or adore Luigi, this model is a no-brainer. If you're trying to find a great display piece, it's also a winner; it's characterful and looks fantastic on a shelf, whether on its display stand or just stood on the wheels.

If you just want one Mario Kart (or Super Mario-themed) set and don't adore Luigi, though, I'd suggest Mario instead. It's very similar and manages all the same tricks, but is more iconic.

Buy it if...

Don't buy it if...

How we tested Lego Luigi & Mach 8

This review was made using a kit supplied by the manufacturer.

I spent roughly a week on and off making Lego Luigi & Mach 8, mostly at the kitchen table or on the sofa while watching TV. I made sure to take note of any highlights or problem areas during the build so I could better make a verdict. If you want a more exact idea of how our testing process works, check out the full GamesRadar+ review policy.

As for myself, I've been building Lego since I was a child in the '90s (one of the first models I remember making was the Arwing from the Star Fox SNES game). Professionally speaking, I've written news, features, and reviews about Lego for over seven years.

This isn't the only great model based on a beloved Nintendo icon; Lego Eevee is hands down one of our favorite Pokemon sets.

August 11 was Final Fantasy VII protagonist Cloud Strife's birthday, according to Square Enix. While the manual for my original PlayStation copy of Final Fantasy VII says otherwise, I'm always down for celebrating the existence of one of my favorite video game protagonists, particularly one I've been collecting merch and toys for since the game originally launched back in 1997.

Back then, the best toys depicting the spiky-haired boy weren't as easily available as they are now. We had the Extra Knights Action Figure of Cloud and his posse, but finding them in stores was a rarer chance than getting Yuffie as your Gold Saucer companion in the original game. Now, there's a sky full of Cloud-based collectibles, from the Final Fantasy 7 Polygon toy set available for $72 at Square Enix that recreates his in-game model as a tiny figure among the rest of the party, to the massive 1/4 scale Masterline statue that costs $2,400.00 (Amazon), more than my entire Final Fantasy collection (games included) combined.

Do you want a plushie Cloud to hug and help deal with his never-ending trauma? That exists. Want a playmat depicting Cloud about to do some serious damage with his Buster Sword? You can get that too, and I've gathered them all below. If you want to get in on the belated birthday celebrations, there are plenty of Cloud collectibles to spend your hard-earned Gil on, and with Final Fantasy VII Revelation on its way, there's likely even more to come. *Insert fanfare jingle here.*

Want more Final Fantasy goodies? Check out this incoming Final Fantasy Origins of Light board game.

There are a lot of KPop Demon Hunters toys available now, and I mean a lot. It's a nice contrast to the initial hype surrounding the film's release on Netflix, when the only thing available was scary-looking bootleg dolls and overpriced shirts exclusive to the Netflix online store.

Now, I can pick up a toy based on Huntrix (HUNTR/X) or the Saja Boys while I do my weekly food shop, and I have many times. But this incoming Rumi Sain-Geom Premium Electronic Sword by Hasbro takes the cake (or should I say Songpyeon) as one of the best toys I've laid eyes on that's inspired by the Netflix phenomenon.

As you can likely guess from its $224.99 pre-order price, the replica of Rumi's Sain-Geom, which was originally unveiled at San Diego Comic-Con 2026, is aimed at adult fans and collectors. Though if I were a little Kpop Demon Hunters fan, I'd be clamouring to own this gorgeous sword, as it's not only a stunning reproduction of Rumi's iconic weapon, but it lights up, reacts to music, and makes sound effects from the film when you wield it. Protecting the Honmoon would be an easy feat with this in your arsenal, and I've never wanted a piece of KDH merch more.

Much like Hasbro's line-up of roleplaying replicas, like the fabulous Marvel Legends Wolverine Mask I know our toy expert Benjamin Abbott desperately wants (and I can't blame him), there's a lot of detail found within Rumi's Four Tiger Sword. Setting aside the lighting and sound effects for one moment, this looks like it stepped straight out of the Netflix musical with its pearlescent shimmer and gold details.

The official Hasbro Pulse storefront has plenty of close-ups that even depict the stunning pink markings on the hilt, which, in contrast to the gold, remind me of some of the most classic replicas in toy history: Bandai's 90s Sailor Moon prop line. The good thing is that this is more detailed than those vintage magical girl toys. For one, the 40-inch (101 cm) sword looks practically to scale with the adult model in the marketing images, so it should be perfect to wield around the room or even use for cosplay if you're comfortable taking a valuable collectable to the often busy convention floor.

Personally, as someone who used to cosplay years ago and even entered competitions, I'd not recommend using this as a prop unless it's just for a photoshoot or two. That's because I know for a fact that the lighting effects would look dazzling for a Rumi cosplay, particularly as they're even sound reactive. Hasbro states the toy has 4 unique interactive modes in total, and 'Song recognition mode' is one of them. If you play a song from the Kpop Demon Hunters OST, or any music for that matter, the LEDs inside will react to the beat - which is unfathomably cool.

Other modes include a 'Rainbow swing FX mode' which reveals rainbow colors that change as you move around, a 'Battle mode' which produces audible sound effects taken from the film, and a 'Display mode'. That last mode gives you the option to display your sword while still basking in the glow from its fancy lighting, which is a really neat inclusion. Hasbro has also included a Huntrix logo stand in the box so you can keep the sword protected while it's in this mode, an inclusion that's often found with other brands' premium toy weapon replicas.

Even if you're not a Kpop Demon Hunters fan, this light-up prop should get you excited about what's to come. Hasbro recently won the licence to create toys based on the Legend of Zelda series, so there's every chance we could see replicas of a wealth of Zelda weapons and items in the future. For now, they've stuck to launching a set of Tears of the Kingdom action figures, but I can entirely foresee an instance where we have replicas of everything from the Master Sword to more obscure items in Link's massive arsenal, from the hookshot from Ocarina of Time to the Wind Waker baton from Wind Waker.

There have been some Legend of Zelda replicas released in the past, and I even own the Bandai Proplica Master Sword, which has slashing sound effects much like Hasbro's Kpop Demon Hunters sword. However, these are often out of stock or have stopped being manufactured altogether. With that in mind, it'd be nice to see Hasbro take the helm and release an abundance of options for collectors that are easy to find amongst the physical and online toy shelves, just like its many Marvel and Star Wars roleplay toy releases.

In the interim, if I didn't already pre-order the singing Golden KPop Demon Hunter dolls, which don't release in the UK until September, then I'd be jumping on Rumi Sain-Geom. The toy isn't expected to start shipping until July 1, 2027, so I can only assume that pre-orders will be available for quite some time. Or at least, I hope that's the case, as it'll give me a moment to recoup my costs from the dolls and stop drinking as much soda pop so I can gather the $224.99 / £264.99 needed for this incredible collectible.

That being said, the official UK Forbidden Planet listing states the toy should start shipping on August 27, 2026, so I might need to start saving sooner rather than later.

• View all KPop Demon Hunters toys at Amazon

Want more KPop Demon Hunters collectibles? Why not check out the KPop Demon Hunters Lego set?

A revamped Lego UCS Millennium Falcon could be on the way next year, according to rumors.

Reliable leaker CarterBricks04 recently posted a superdrop of set info for 2027/2028, and it features everything from major Lord of the Rings kits (including the fortress of Helm's Deep from Two Towers alongside Bree's Prancing Pony tavern) to a Disney Frozen model. However, chief amongst these is a new Lego UCS Millennium Falcon that will replace what many fans consider to be amongst the best Lego sets.

This information is attributed to an "unlocked LEGO file" on reddit, and while that's vague enough to cast doubt (we get no information as to where the file came from or what it was), CarterBricks04 has a good enough track record that I'd be willing to think there's something in this. They correctly flagged the new Ministry of Magic set and the upcoming Lego Avengers Doomsday kits ahead of time, for example. That makes me think we can take this with a pinch of salt rather than the entire shaker.

Another reason I believe there may be truth to this is the fact that the current Lego Ultimate Collector Series Falcon is one of the retiring Lego sets this December. That leaves the way open for a new version, though what it could add is up for debate. As noted in our Lego UCS Millennium Falcon review, the existing model is arguably "the greatest Lego Star Wars set ever." In fact, the only quibble we had was that it lacked some of the ship's pilots (Lando and Nien Nub). Would the replacement refine the existing design, with extra minifigures drawn from across the saga? Could it be even bigger or more detailed, perhaps with a grander interior? I honestly don't know how Lego could improve on the previous model, though it almost always finds a way. Just look at the recent Lego AT-ST Walker.

Because of this, I'm more excited about the other rumored kits in this leak. A new Lego Helm's Deep model feels like a foregone conclusion (to the point that it was near the top of my list for Lord of the Rings sets I expect to see after Minas Tirith), but I'm still pumped at the thought of a grand, hyper-detailed recreation along the lines of Lego Rivendell. And the Prancing Pony? A Lego spin on the pub where the hobbits meet Aragorn for the first time is unexpected, but welcome nonetheless. Lego's design team has a talent for making exquisite medieval buildings full of secrets (such as the Lion Knight's Castle), so it plays to their strengths.

As for the rest, a Lego Arendelle from Frozen makes total sense and should impress based on the team's work with the Lego Disney Castle and Beauty and the Beast castle. In much the same way, a modular Daily Planet model (presumably to tie in with 2027's Man of Tomorrow movie) would play into the team's strengths that it already showed off via Arkham Asylum. I suspect it'd also be gratefully received by fans because of how quiet things have been for Lego DC recently.

Which of these rumored sets are you most excited to see? Let me know in the comments below.

• See the latest Lego sets at the Lego Store